TDS Tester, EC meter, conductivity meter, water measurement tools

Description

Use steps:

1. Please unplug the electrode protective sleeve before use

2. Press the switch, place the electrode into the test solution

3. After the numerically stable, press the HOLD button and take it out of

the solution to read.

4. After reading ,turn off the meter ,wipe clean the electrode before

sleeving it.

 

Instrument features:

1. Lock Function: easy to read and record, the instrument will lock the

reading

2. *-minute auto shut off feature, battery won't run off

3.Measurement Range:

Conductivity: 0 *- ***0us/cm

TDS :0 *- ***0ppm***0ppm

Degrees Celsius: 0 .1 *- *0 .0.0 °c, F: *2 .0 *- **6 .0 ° F

4. Accuracy: ± 2%

5. N.W.: *5g

6. Size: **4**0**4 mm

Shift between TDS & Conductivity:

The factory default TDS data, if the conductivity data of the solution is

needed , please touch the SHIFT button, the instrument automatically

shifted

Automatic temperature compensation:

The instrument with automatic temperature compensation function

under measurement mode.

Temperature shift:

Continuous touch the SHIFT button twice, degrees Celsius and degrees

Fahrenheit conversed, the factory default degrees Celsius

Maintenance:

Keep the electrode clean, cover the electrode protective sleeve, please

take out the batteries for long periods idle.

Note:

1. The instrument is a professional instrument, please under

professionals instructions in order to avoid instrument failure

2. Avoid heat, direct sunlight

3. Please adopting standard buffer solution calibration, incorrect

calibration would cause measurement error, thus affecting the accuracy

of the test solution, or cause the instrument not working properly.

4 . Do not thrown the instrument into the test solution to

avoid the circuit board short circuit.