Sell ACRYLIC PUTTY THICK Buliding and Construction

Description

DESCRIPTION

Acrylic emulsion based thick surface smoothing putty used for background preparation of water based paints in exterior walls.

 

APPLICATION

 

Used for filling the pores in the mineral based surfaces in exterior sides like concrete, light concrete, aerated concrete or plaster.

 

FEATURES

·        High adherence and breathing ability.

·        Forms a very durable, smooth and non-chalking surface.

·        Decrease in waste of paint.

·        Not much chalking during sanding.

·        Smoothing the surface with maximum 2 coats.

·        Water-based, odor-free; harmless to human health and environment.

 

SURFACE PREPARATION

·        Clean the surface of all dirt, oil, blistered paint and dust; very absorbent and chalking surfaces must be undercoated with FIRACOLOR UNIFIRA.

 

APPLICATION INSTRUCTIONS

 

·        FIRACOLOR ACRYLIC PUTTY THICK must be mixed thoroughly prior to application.

·        FIRACOLOR ACRYLIC PUTTY THICK must be applied with steel spud, as one or two coats depending on the surface roughness.

·        *4 hours after the application of the putty, the defects on the surface and spud marks must be smoothed with sandpaper.

 

DRYING TIME: The contact timeis **6 hours, and thorough-dry time is *4 hours in environment of *3oC.

 

PACKING: *5 kg

 

CONSUMPTION: Depending on surface smoothness and application methods, for single coat application:

FLASH POINT: Water-based, non-flammable

 

STORAGE:Store in enclosed packaging for 1 year between *5oC to **0oC

WARNINGS: Keep away from places where children can reach. Avoid eye and skin contact.