Steel cord conveyor belt

Description

Steel cord conveyor belt
 
Belt strength(ST NO. ): ST**0~ST***0
Belt width(mm): **0~***0mm

1. Usage
Steel cord conveyor belts are widely used in high strength, long distance and heavy load than sportation of materials, and they are also used in high strength and distance transportation of materials on special occasions.
2. Characteristic
(1) High tensile strength: The belts are suitable for large span, long distance transportation of materials.
(2)Small elongation in use: The belts need only a very short take-up stroke distance.
(3)Small diameter of drive pulley: The belt body has a layer of longitudinally arranged steel cords as its skeleton, and thus is flexible and fatigue - resistant. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.
(4)High adhesion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber has the property of good adhesion with steel cords. Therefore the rubber is tightly adhered to the steel cords that is shock resistant and hard to peel off, which make the belt long life.
(5)Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very equably arranged and have the same tension, so the belts are well balanced in turning and difficult to run away.
(6)Good trough ability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.
(7)Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton, the steel cords on the conveyor machines to prevent accidents.  
Type: Conventional, Fire-resistant, Cold-resistant, Abrasion-resistant, Heat-resistant, Acid/alkali-resistant etc. (referring rubber cover)

Tel: ***************8
Fax: ****************4
Skype: Linda-wang*4
Email: conveyorbeltsupplier(at)hotmail(dot)com