Small-scale absorption chiller,this type of absorption chiller is to use hot water(from solar collector or other) to make cool.As manufacture of absorption chiller,we can supply chiller only or integrated unit which not only includes absorption chiller,but cooling water tower,chilled water pump,vaccum pump and hot water three-way valve.Normally,its stardard technical parameters as following,but we would like to supply customerized service if you need.

 

 

1)Cooling capacity:*1.5Kw to **0Kw /3.3US RT to *9US RT

2)Refrierator:water

3)Absorb: lithium bromide solution  

4)Inhabitor: lithium chromate or lithium molydate

5)Inlet temp of hot water:*0°c**5°c 

6)Inlet & outlet temp of chilled water:*5°c/1.0°c or *2°c/7°c

7)Power consumption for absorbtion chiller only: from 0.*5Kw to 1.1Kw

8)Power consumption for intergrated unit: from 1.0Kw to *1.2Kw

9)COP: 0.**1.*5

*0) Designed life span:*0years

for the solar air conditioner:

1、we used solar to collect heat, and warm up water to more than *2℃,and we use the absorption chiller to for cooling,just like you did;

2、we also have a factury to produce solar collector, we have another factory to produce absorption chiller;

3、 we have a lot of project was operate , in our factory we just used solar air conditoner;

4、we have small type absorption chiller ,from *1.5KWto **0kw,we also have ***0kw chiller;