Description
Features:
1. Metal structure, Classic styling in modern, luxurious solid and
durable;
2. Adopt Japan MABUCHI micro-motors which ensure **0,**0 running
times without problem;
3. Using America ATMEL chips for PCB, stable and durable;
4. International standard five latches lock which pass the testing
of **0,**0 times.
5. Anti-technology opening cylinder and computer keys endow door
lock with higher burglarproof ability;
6. Hotel lock management software can be connected with the
reception desk of management system of Germany Fidelio company;
7. Current latest **2 pcs unlocking records can be stored in the
chip of door lock, even the mechanical keys opening record without
exception;
8. Normal-open state can be set for meeting.
9.Perfect key card management and clear authority. There are Master
Card, Building card,Floor Card, Guest card, Emergency card. Hotel
managers can modify the authority of each card according to actual
need at any
time.                                                   Â
Technical parameters:
1. Power supply DC4.5V*6.5V, 4 standard 1.5V AA alkaline
batteries;
2. Battery life Over ****0 times normal unlocking;
3. Static current *1.Data keeping Over *0 years;
*2.Applicable chip Mifare*1 card(*3.*6MHz), Temic ***7 card or EM
card (**0KHz***0KHz);
*3.Reading & writing wayNon-touched closer induction;
*4.Opening time Turning the handle one time to open the door in
valid, if dont open the door, it will be locked automatically in
6s;
*5.Reliable opening The success rate of opening is **0% in normal
punching;
*6.Low voltage alarm When voltage lower than 4.8V, there has
acousto-optic warning but it still can be opened **0 times;
*7.Mechanical key Equipped with spare mechanical key make sure the
door unlocking in emergency; It can be made into one key for one
door or one key for all doors;
*8.Installation size Make sure the door thickness between *8 and *5
mm (Please mark specially if over *5mm).*5mm is the best thickness.
If the door surface is decorated, the distance between the
decorative edge and edge of door must be over **0mm.
Â
