Description
Features :
Great Planes Giant Scale *8% Extra **0S ARF
GPMA***0
Construction: Built-up balsa and ply airframe,
sheeted foam turtle deck with balsa sheeting, full deflection
throws and double beveled control surfaces
Wings: Two-piece wing panels with aluminum
joiner tube
Horizontal Stabilizer: Two-piece with carbon
fiber joiner tube
Radio Compartment: Located under canopy, plywood
reinforced
Covering: Top Flite MonoKote
Cowl: Carbon-fiber/fiberglass, painted to match
covering
Cockpit Detail: Instrument panel and painted
pilot head
Canopy: Clear, integrated with hatch, removal
allows access to electronics and battery packs
Landing Gear: Carbon-fiber
Main Wheels: 5" (**7mm) Du-Bro, constructed of
rubber
Tailwheel: Adjustable aluminum
Landing Gear Fairings: Painted fiberglass
Aileron Control: Four servo, prehinged with
giant scale hinge point hinges
Pilot Figure: Lightweight painted fiberglass
Fuel Tank: *9oz (***0cc)
Spinner: Polished aluminum 4" (**2mm)
diameter
Stabilizer: Bolt-on halves with prebuilt servo
pockets, carbon fiber tubes
Rudder: Pull-pull design with three servo
set-up, dual ball bearing supported tiller arm and aluminum servo
tray
Hardware: Complete giant scale set with
all-aluminum servo arms (normally an extra-cost add-on)
Building Time: Ready to fly in **8 hours
Warranty: Great Planes Model Manufacturing
Company guarantees this kit free from defects in both materials and
workmanship at the date of purchase.
Specifications :
Wingspan: **0.5" (***5mm)
Wing Area: ***9 sq in (**7 sq dm)
Weight: *6 - *8lb (*6.3 - *7.2kg)
Wing Loading: *6 - *8 oz/sq ft (**1 - **7g/sq
dm)
Length: **3" (***6mm)
Airfoil: Fully symmetrical
Center of Gravity: **3/4" (**6mm) Back from the
wing\'s leading edge measured at the wing tips
Control Throws- Low Rate High Rate 3D
Ailerons: Up & Down **3/8" (*5mm) 2" (*0mm)
**1/2" (*0mm)
Elevator: Up & Down 1" (*5mm) **3/4" (*5mm)
**3/4" (**0mm)
Rudder: Right & Left 5" (**0mm) 7" (**0mm)
8" (**0mm)
Contents :
Pre-built and covered wing and fuselage sections, aluminum spinner,
instrument panel, wheel pants, wheels, all hardware including
aluminum servo arms and servo tray, pilot head, and manual
MOQ Price : USD**4.*0 (NEGO)
