Sell VOC emission testing chamber

Description

1. Scope of Application

      This product is mainly used in researching the VOC emissions change rule from wood-based panel and other light industry products. According to the results, the detected products can be graded, and environment quality can be evaluated.
     This product meet the standards of GB*********1, GB*********1,GB*********1, ASTM D******2, EN ****1, EN******1, ASTM D******7 ,ASTM D******8,ASTM D******1,ASTM E******6.

2. Standards
GB****0—***1  
《Indoor decorating and refurbishing materials-Limit of formaldehyde emission of wood-based panels and finishing products》
GB*********1
《Indoor decorating and refurbishing materials-Limit of harmful substances of wood based furniture》
GB****7—***1
《Indoor decorating and refurbishing materials-Limitations of harmful substances emitted from carpets,carpet cushions and adhesives》
ASTM D***7—*2
《Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber1》
EN **7—1    
 《Wood-based panels-Determination of Formaldehyde Release》
 Part1: Formaldehyde Emission by the Chamber Method
EN******1    
 《Construction-Products Determination of VOCs Release》
Part1:Emission Method of Environmental Testing Chamber

Reference Standards:
ASTM D******7
《Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products》
ASTM D******8
《Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions》
 ASTM D******1
《ASTM D******1 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products》
ASTM E***3—*6
《 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber》

3.Technical Parameters
1．Temperature Range：  (*0～*0)℃    （Precision：±0.5℃）
2．Humidity：(*0～*0)%RH.  （Precision：±3%R.H.）
3．Air Exchange Rate:0.2 m3～2 m3/h(Rate: 0.2～2pcs/h   Precision：Ventilation quantity:±1%）
4． Air Speed On Surface： Air speed on level maintain by（0.1～0.3）m/s，Precision≤0.*5m/s
5． Interior Dimension：（1±0.*2）m3
6． Interior Pressure：*0±5Pa
7． Tightness： At static state：1KPa，Leakage rate≤1×***3 m3/min
8、Average power:1.5KW， Rated power:3KW。
9. Protection：
1）High voltage protection ,Over-current protection of refrigeration system
2）Over-temperature protection of heater
3）Over-current protection of electrical machine
4）Lack-water protection
5）Over-heating,over-current,over-pressure protection of air pump
6）Out of phase protection, Phase order protection
7）Over-current protection,Short-circuit protection of power
*0.Environment condition
1）Temperature：5℃～*5℃
2）Humidity：≤*5%
3）Pressure：*6kPa～**6kPa
4）No pollution sources
*1.External Dimension：W***0mm×H***0mm×L***0mm