Description

Habasit Product Data Sheet
F*1
 

View this Data Sheet as PDF 
Product Designation
    
Product Group:    Polyamide machine tapes
Product Sub-Group:    -
Main Industry Segments:    Paper manufacturing and processing
Belt Applications:    Machine tape
Special Features:    Abrasion resistant; Constant coefficient of friction; Constant grip and release property; Forgiving in case of short term shock like overloads
Mode of Use/Conveyance:    Declined; Horizontal; Inclined; Twists with short center distance; Vertical
Product Design (enlarged)


Product Construction/Design
        
     Conveying Side (Material):    Acrylonitrile-Butadiene-Rubber (NBR)
     Conveying Side (Surface):    Rough structure
     Conveying Side (Property):    Adhesive
     Conveying Side (Color):    Green
     Traction Layer (Material):    Polyamide (PA)
     Number of Fabrics:    2
     Running Side/Pulley Side (Material):    Acrylonitrile-Butadiene-Rubber (NBR)
     Running Side/Pulley Side (Surface):    Impregnated fabric
     Running Side/Pulley Side Property:    Non-adhesive
     Running Side/Pulley Side (Color):    Green
Product Characteristics
    
Slider bed suitable:    Yes 
Carrying rollers suitable:    Yes 
Troughed installation suitable:    No 
Antistatically equipped:    Yes 
All data are approximate values under standard climatic conditions: *3°C/*3°F, *0% relative humidity (DIN ****5/ISO **4), and are based on the Master Joining Method.
Technical Data
                
Thickness:    1.*5     mm    0.*5     in.
Mass of belt (belt weight):    1.*5     kg/m2    0.*6     lbs./sq.ft
Pulley diameter minimum with counter flection:    *0     mm    1.6     in.
Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP****5 / EN ISO****1):    8.5     N/mm    *9     lbs./in.
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP****5 / EN ISO ****1):    2.6     N/mm    *5     lbs./in.
Operating temperature admissible (continuous):     Min **0
Max **0     °C
°C     Min *4
Max **2     °F
°F
Coefficient of friction of driving pulley of steel:    0.*5     [-]    0.*5     [-]
Seamless manufacturing width:    ***0     mm    *7     in.
All data are approximate values under standard climatic conditions: *3°C/*3°F, *0% relative humidity (DIN ****5/ISO **4), and are based on the Master Joining Method.
Chemical Resistance
    
Chemical Resistance Class:     2 (for details, see separate overview)
Remark:     These indications are not guarantees of properties.
Resistant to:    All solids; Dirt; Dryness; Fats; Humidity; Mildew; Oils; Putrefaction
Limited resistance to:    None
Not resistant to:    Caustic Soda > *0%; Chlorinated hydrocarbons; Concentrated organic and inorganic acids; Cresols; Hydrochloric acid > *0%; Sulphuric acid > *0%
Calculations

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Installation and Handling Instructions

Do not go below initial elongation (epsilon) ~0.5%.; Install the slack belt and tension until running perfectly under the full belt load.
Storage

For details consult \'Storage and handling requirements for belts and machine tapes\' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Joining System
    
Master Joining Method:    Thermofix  
Remarks:    Master joining method for standard applications
Link to Joining Data Sheet    


    
Alternative Joining Method:    Mechanical joining  
Remarks:    Optional joining method
Limitations

Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX *5 regulation or EU directive *4/9) and therefore is subject to user’s analysis in the respective environment. 
Legend
All data are approximate values under standard climatic conditions: *3°C/*3°F, *0% relative humidity (DIN ****5/ISO **4), and are based on the Master Joining Method.
    
*    No calculation Value
2)    Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive ***2/*2/EC
3)    CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal.
8)    Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited
BfR     German federal institute for risk assessment (Bundesinstitut fuer Risikobewertung)
EEC    European Economic Community
EU    European Union (Directive ***2/*2/EC)
FDA    Food and Drug Administration
NA    Not available
NAP    Not applicable
USDA    United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.)
Quality System (certified)

Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide consistently high quality products and services, to the requirements of the ISO ***1/***0 Quality management systems standard.
Certified Manufacturing Sites :
Habasit AG, Switzerland : Registered by SQS, CH ***2 Zollikofen, Switzerland, since ***7.
Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since ***2
Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since ***2.
Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since ***1.
Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since ***6.
Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since ***6. 
Product Liability, Applications Considerations

If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. 
Last modification on *********9