Description

dental trimmer 

dental trimmer for plaster models ZB-SX
This Model Trimmer is used in restorative dentistry,it is neccarry tool for trimming plaster models.
Dental lab supply in china

 
This is a new high power, low noise model trimmer. It's overall structure of the motor installed base and support has been 

granted the national patent for utility model.It is Hydropower synchronization 

Main technical parameter:

Voltage: **0V Frequency *0HZ
Power: **0W
Rotate speed: ***0 rotate / minute
model: water supply automatic
Dis material: DIAMOND
Applicable abrasive disc aperture: ï¿ *5.5 / ï¿ *2
size: *4**5**5CM
Gross weight:   *0KG
 

Operation instruction:

1.keep the machine set level (base on both sides of the four hole support customer installation peng rise screw fixed), 

access pressure pipe (the pressure pipe by electromagnetic valve control when it working, with the motor switch 

synchronization), pull out of exhalent siphon

2.Electricity, open motor, no-load and see operation has abnormal noise or not.

3. there are three Angle of Working platform, using the adjusting screw to adjust the meantime.

4.Replace sand tablet. Cut off the power supply, open the front cover,remove the grinding wheel cover   (if not convenient 

can also remove the spray pipe  and it can replaced sand tablet.

5.After the completion of the work, it is necessary to clear residual sundry in time.