Sell Seals for Oil Film Bearing, 12 months Life!1/2

Description

Seals for Oil Film Bearing, *2 months Life!        

The advantages of DF seal:

1. Life: *2 months for hot strip mill, for plate mill.

1. The outside lip D and E were changed to oblique angle, lip edge become thinner, so the lip adhesion becomes stronger.
2. The seal baffle was changed from oblique angle to right angle, so the compression on two lips is equal when axial float happens, thus lip will has no clearance.
3. Negative pressure and pumping principle were adopted, leakage was reduced, thus oil cost was cut down a lot and seal life was improved.
4. Delivery time: FOB within 4 months after receiving of down payment.

1. Free trial order:
2. Single piece supply
3. Supply by SOD Mode
4. Pay by production tons

1. Technical consulting, free of charge.
2. Client’s purchasing Plan, connected to CamZone’s production plan.
3. Client’s life database
4. Client’s un-normal Life alarm
5. Know-how of installation, commissioning and operating, to get Long Life.

1. Main Rolling Equipment: Supplied by VAI
   1. Roughing mill: 1 rolling stands, R0 *2’’ KL Bearing
   2. finishing mill: 7 rolling stands, F*-F6 *6’’**4 KL-RT-QC
   3. Products: ASTM **6 L Stainless steel, wide ***0 mm, thickness ***0mm, weight of Coil *5 tons
   4. Yearly Output: **0 **0 tons.
   5. Oil Film Bearing (OFB) supplied by Morgan, Danieli,
   6. Seal, supplied since ***8

1. Mill builder: SMS-Siemag
2. Bearing size: R***8”, F1&F***6”
3. Products: Stainless steel
4. The designed rolling force is ***0Ton. The existing actual rolling force is around ***0~***0Ton.
5. Seal supplied since ***4
6. Average life: *0 months
7. Average Supplying QTY of one year: *5sets

1. Client’s Drawings
2. Production mix / steel Grade
3. working process parameters (coil ID/OD, temperature, coil weight, coil length, off-line condition)
4. life of existing suppliers

1. What problems are you facing?
2. Which point you are not satisfied?
3. What problems do you want to solve recently?
4. About future, what are your wishes, hopes, requests and expects? Including Materials? Life? Designs? Engineering? Hard wares? Soft wares?