Description
*2V solar brushless
DC pump /Â floor heating / computer automobile water cooling
pump high temperature mute
Maintenance-free
Â
It is our latest
brushless DC pump product, ceramic shaft and ceramic sleeve, more
muted. The consecutive life expectancy of can be over **0,**0
hours. Amphibious 2 use. Non-self-priming, water should be
able actively flow into inlet of pump at land use connecting
with outside pipe. Long time work without fluids inside pump can
be damagable.
Â
Typical features:
Operating voltage :***2V
(voltage more than *2V is not advised), current 1.1A at
*2Vdc, Max static head 3.5 meters, Max horizontal flow **0L / H.
(Ultra power saving)
Materials:Pump body with
high-temperature-proof plastic material. The sleeve and shaft with
high-strength ceramics. (Note: usually common pump only with the
ceramic shaft, without ceramic sleeve)
Structure:with four suction cups
on the bottom, can be arbitrarily fixed on a smooth
surface.
Power cord:diameter 3.0MM
waterproof round wire length of 2 meters and waterproof
connector.
Product size:*0 * *6 * *8
(H) MM (including water inlet and outlet)
Pump outlet
diameter:Â 1/2 inch threaded, OD *0MM,
ID*2MM
Pump
inlet diameter: 1/2 inch threaded, OD
*0MM, ID *2MM (plus 2 waterproof gaskets).
Suitable medium: water,
oil, and other acid-base solution. (Land use when pumping acidic
liquids, submersible installation is not advised at this
case)
Max
Operating Temperature: resistance to high temperature of **0 degrees.
Pumps can dive at room temperature, land use at high
temperature(>*5C). (Pump body material itself can be resistant
to **0 degree Celsuis)
Useages:Â refrigeration
system, water circulation system, the solar collector circulation
system, the solar temperature circulation system, hot water pipe
circulation system (to get instant hot water when opening), solar
water-warming mattress, floor heating, fountains, etc.
Â
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max
head means the static head. The pump can lift to the max heightwhen
there is no flow. If you want special flow at special height, you
must choose more higher head than the height you want to pump.
2. Make sure the dimension(threaded interface or not, the direction
and diameter of outlet and inlet).
3. Working environment(temperature and medium).
4. Other functional requirements, such as time control, motion
control, pressure control, flow control, and speed adjustment.
Â
Note: Â 1. Working at
rated voltage. The positive pole is Brown wire, the negative pole
is Blue wire.
2. This pump is centrifugal pump, it can\'t vent the air
automatically, so it must be operated by submersible
installation.(if outside water installation, you should make sure
it is installed blow the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
