Description

Material: fiberglass or polyester fabric
Model No.: AX**2
Size: 5 x **0cm
Package: *0bags�*2boxes/ctn
�
Features:
Good X-ray radiolucency
High strength and light weight
Good air-permeability
Easy operating
Eco-friendly material
Good conformability and mold-ability
�
Operation:
Wear the gloves and choose the proper specifications
Use the cast padding or stockinet on the fixed part
Open a bag and take out the cast, Immerse in room temperature water at **6 seconds and press **3 times, take it out and squeeze out the excess water
Wrap the cast spirally according to the need, keep the proper tension. Wrap **4 layers at non-weight-bearing position and **6 layers at weight-bearing position
Shape the wrapped cast according to the need. The solidify time is **5 minutes, *0 minutes later the cast reaches the enough strength
Use the electric cast saw to cut and remove it
�
Notes:
The operator should wear gloves to avoid the polyurethane touching and adhering the skin
Open one bag at one time and use the cast immediately. Don\'t open multi-bag at the same time, so that to avoid weakening the strength
The cast need to be cut and removed by the electric cast saw
Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify
�
Storage:
Be careful not to break the packaing
Storage at room temperature
Shelf-lift: 2 years
�
Please contact with me salenezhang at xa-ansen.com freely!