Description
High modularization design: may equip with various motor or other
power input conveniently. Same machine type may equip with various
power motor. It is easy to realize the combination and junction
between every machine type.
Characteristics of product:
1.High modularization design: may equip with various motor or other
power input conveniently. Same machine type may equip with various
power motor. It is easy to realize the combination and junction
between every machine type.
2.Transmission ratio: fine division, wide scope. The combined
machine type may form very large transmission ratio, i.e. output
very low rotary speed.
3.Form of installation: the position to be installed is not
limited.
4.High strength, compact: the box body is made of high strength
cast iron. Gear and gear shaft adapts the gas carbonization,
quenching and fine grinding process, therefore the bearing capacity
of unit volume is high.
5.Long life: Under the condition of correct type chosen (including
choosing suitable operation parameters) normal operation and
maintenance, the life of main parts of speed reducer (except
wearing parts) should not be less than ****0 hours. The wearing
parts include lubricating oil, oil seal and bearing.
6.Low noise: because main parts of speed reducer are processed,
assembled and tested critically, therefore the noise of speed
reducer is low.
7.High efficiency: the efficiency of single machine is not less
than *5%.
8.May bear larger radial load.
9.It may bear the axial load that is not more than *5% of radial
force.
Model：
K*7ã€K*7ã€K*7ã€K*7ã€K*7ã€K*7ã€
K*7ã€K**7ã€K**7ã€K**7ã€K**7ã€K**7
Main Technical Features:
Output Speed (r/min)
0.****2
Output Torque (N. m) ****0
highest
Motor Power (K
w)
0.*****0
