Description
Single-piece Fire-proof Glass
(Fire Resistant) Description:
Had garnered ISO***1: ***0 & National CCC Compulsory
Certification, We have almost **0 sets of processing equipments,
such as INTERMAC automatic cutting machines, INTERMAC processing
center with 3 axes and 5 axes made in Italy. BOVONE **1 trimming
machines, BOVONE ***5 multilevel edge machines, tamglass tempering
furnaces with forced convective system are made in Finland and
automatic double glazing production line is the most advanced in
the world.
Fireproof glassfireproof glass is a regulation of insulating
refractory trials can maintain its integrity and stays special
glass, according to the grades of refractory performance is divided
into three categories:
Class A at the same time satisfy the requirements of Fire Resistant
glass insulating refractory integrity, refractory stays. Including
composite fire prevention and fire retardant glass two kinds. Such
glass has pervious to light, fire, smoke, fire, and keep out
thermal radiation), sound insulation, impact resistance, applicable
to building decoration lights, partition on the steel fire door,
window, walls, lighting, perspective of smoke hanging wall, floor
and other building components need to be both transparent and fire
prevention.
Class B Marine fire glass, including portholes and rectangular
window flameproof glass, fire glass outer surface of the glass is
tempered safety glass, glass board on the inner surface material
type can be arbitrary choice.
Class C only could satisfy the requirement of refractory integrity
monolithic cesiumic potassium flameproof glass. This kind of glass
has pervious to light smoke, fire prevention, insulation, high
strength, etc. Is suitable for without heat insulation requirements
of fire-resistant glass partition wall outside, fire Windows,
curtain wall, etc.
Fireproof glass Suppliers in the developed countries and
areas, for the application of fireproof glass has a long history,
has established a set of relatively complete and practical
application of the fire protection glass test standards, of which
Japan JTCCM, JIS***1, BS**6 Britain, the United States UL, ASTM
most representative.
These standards require testing of Fire Resistant glass and the
frame and the refractory material consistent with integrity,
request test framework structure and material shall be the same as
the practical use, the requirements on the engineering practice 1:1
proportion test, use one of the biggest glass size requirements
engineering in the actual use Fire Resistant Glassof the fire
protection glass must be within the size range coverage of the test
report, from the detection system to ensure the flameproof glass
products, the quality of the whole society is worth our using for
reference.
Fire Resistant glass test standard of abroad, Japan standard JTCCM
"fire prevention performance test method, evaluate business book of
the most strict. It emphasizes the fireproof glass and frame and
all kinds of auxiliary materials, must be tested as a complete fire
protection glass system. Must start with two sets of the same
systems for fireproof performance, fire glass test, one set of
flameproof glass system to detect fire resistance of positive
opposite the fire endurance of another set of detection, fire
endurance with class b for *0 minutes, *0 minutes to two levels of
integrity.
Monolithic fire Resistant glass adopts special process to promote
the heat stability performance of float glass and could classify
different grades according to the time against to fire and heat
attack. Then this could stop the spread of fire and leave enough
time to escape and put out the fire. The two surfaces of the
monolithic fire Resistant glass have the same performance against
to fire. It could promote the strength performance, wind resistance
performance and safety performance if you use fire Resistant glass
in curtain wall of architecture.