Sell SCN Perforated Plug Low Noise Type Control Valve

Description

SCN is a remodel product of SGC. The series are dedicated specifically for low noise and critical anti-cavitation applications on liquid, gas or steam. Unique perforated cylinder plug and multi hole cage control flowing velocities in the valve trims to carry out fluid rationally expand and scientifically arrange pressure grads. The noise level is considerably reduced by ****0 dBA.
SCN series is particularly effective for modulating compressible fluids at high pressure drop ratios.
 
â–         Standard Specification
 
Valve Body
Type: Cast globe Valve
Nominal Size: DN*5, *0, *5, *2, *0, *0, *5, *0, **0,
**0, **0, **0, **0, **0, **0
Nominal Pressure: ANSI **0, **0
DIN PN*6, *5, *0
JIS *0K, *0K, *0K
GB   PN1.6, 2.5, 4.0 MPa
End Connection: Flange ANSI B*6.5　RF, RTJ
DIN***3/***4/***5 RF
JISB***1 RF
JB/T*1 RF
JB/T*2.2　FM
Weld: ANSI B*6.5　SW（DN≤*0）; BW（DN＞*0）
Face to Face Dimension:
ANSI**0RF, JIS*0K （IEC********1 *7 Series）
ANSI**0RF, JIS*0K, JIS*0K （IEC********1 *8 Series）
ANSI**0/**0 RTJ （ASME B*6.*0 CLASS **0/**0RTJ）
DIN PN*6, *5, *0 （DIN****-F1）
GB PN1.6, 2.5, 4.0 MPa （ISO***2 1 Series）
Please refer to table 6.1~6.4
Body Material：Please refer to table1 Please refer to figure 3 for Operated Temp. &Pressure Range
Bonnet Type：STD type……**6℃～**0℃; **0℃～**0℃
Radiation fin type……**0℃～**0℃
(Please pay attention to the different Temp. &Pressure Range of material)
Packing Material：PTFE V-ring compound packing、graphite compound packing、
graphite packing,
Operating Temp. &Pressure range is shown in table 2，figure2
Seal Gasket：Spiral wound gasket（PTFE***6、Flexible Graphite***6）,
Graphite with metal gasket（Graphite***6、Graphite***4）
 
 
Valve Trim
Plug Type：Perforated cylinder plug
Flow Characteristic：EQ%、Linearity (Please refer to figure4)
Trim Material：Please refer to table 3 for STD material assembly，operated Temp. &Pressure Range
 
Actuator
Type：Multi-spring diaphragm
Air Supply：Max. 6bar
Ambient Temp.：**0℃~**0℃
Spring range：As shown in Table 5.1～5.4
Air Connection：G1/8（SA1）；G1/4（SA2）；G3/4（SA3）
STD Specification：As shown in Table 5.1～5.4
　
Accessory
Positioner，Filter-regulator valve，Solenoid valve，Limit switch，
Valve position Transmitter，Booster relay，Lock-valve，Handwheel，etc.
 
Action
Air to open，Air to close
 
Performance
Range ability：*0:1
Seat leakage：Metal seal is according to ANSI B*6.**4 ClassⅣ，ClassⅤ
Hysteresis：3%（Without Positioner） 1%（With Positioner）
Linearity：±5%（Without Positioner） ±1%（With Positioner）
Rated CV：As shown in table 4
Allowable pressure differential：As shown in table 5.1~5.4
Figure Size：As shown in figure5.1，5.2，table 6.1~6.4
Weight of product：As shown in table 6.1~6.4
 
■　Specifications：
â—‹Special inspection
Flow characteristic test，material test，low temperature test，steam test，non-damages test
â—‹copper-free treatment
â—‹non-standard painting
â—‹dust and sand proof
â—‹vacuum service
â—‹tropical area proof
○completely oil-free，water-free treatment
â—‹special air piping and fitting
â—‹strong corrosion proof
â—‹stainless steel bolt and nut for exposed parts
â—‹cold area proof