Sell

Description

SOLAIZER-Solar Power Home Generation system(MDF Multi-Functional Device)

This unit charges battery using the solar cell. It is a multi-purpose solar energy charging battery which can be used to operate LED lamp or other electric equipment such as DC fans or SC amplifier. When fully charged, it will last approximately *0 hours when one LED(3.6W) lamps are connected.

Parts Structure
               1. Power switch
               2. Power indicating lamp
               3. Status indicator LED (Battery charging/Battery Status/Solar
                   charging indicator)
               4. Handle
               5. Sealed lead battery(*2V/*2An)/internally installed
               6. Solar cell charging input/jack 
               7. Adaptor charging input jack
               8. fuse(circuit breaker)
               9. Power output jack(to connect lamp or othereqipment)
              *0. LED lamp
              *1. Light sensor(turns on/off according to amount of light)

Basic Connection Diagram 

Standard product includes Solar cell(*9.3V x **0mA/*7W). Main Control Unit(MCU***4W)and two LED lamps(3.6W). Solar cell takes solar energy and converts to electric power.

Cable is *5 meters long. Main control unit takes electric power supplied from solar cell or external AC adaptor and charges internal battery, thentrasfersto external output jack.

Equipment powered with *2V DC can be connected additionally. LED lamp can be connected to output jack of Main Control Unit. Two 3.6W LED lamps are supplied as standard and 7.2W lamp can be purchased as an option. Lamp cable is *5 meters long. Maximum electric output to be connected to output jack can not exceed *2V/3A. 

Technical Characteristics of Micom Control Circuit
 (1) Maximum Power Point Tracking(MPPT)
MPPT automatically tracks to maintain the best charging status.
 (2) Generation Maximum Power Indicator(GMPI)
GMPI measures the generated amount and indicates the status by LED (Please refer to Charging by the solar cell)
 (3) Protecting battery
Battery is protected by automatic power shut off in cases of low voltage due to discharging or high voltage due to over charging.
(4) Indicating battery charging amount
Displaying battery charging amount with different indicator LED light
(5) Indicating residual battery amount
Displaying residual battery amount with different indicator LED light
(6) Power Control Unit output jack protection from over flow
 Automatically blocks the output jack to protect from any malfunction or short  circuit of plugged-in equipment.