Description
HBP box-type of industrial water chiller 1. Principle and Use:
Box-type industrial chillers are use air or water for condenser
cooling medium, use water as the refrigerant of the industrial
cooling equipment. It Widely used in various fields of plastics,
electronics, food, pharmaceutical, electroplating, chemical,
printing, coating, laser and CD-ROMs and other industrial equipment
or mold cooling 2. Type: Within the box-type industrial chillers
containing chilled water pump and water tank, on-site installation
is simple, easy to maintain; Box-type industrial chillers are
air-cooled and water-cooled two for the selection of customers
according to the situation. 3. Evaporator: 3 - 5HP chiller using a
submerged coil evaporator unit 8HP more than a shell and tube or
plate evaporator heat transfer efficiency, and water resistance. 4.
Controller: All microcomputer controller accurate, intelligent, and
truly achieve perfect control of the machine, thus ensuring the
safe operation of the unit and achieve the purpose of effective
energy-saving, easy to use, friendly interface. 5. Water
temperature & Antifreeze solution: Box-type industrial chillers
can achieve a variety of cold bottled water and add the appropriate
antifreeze in the chilled water side, 0C to - *5C the water
temperature, in order to adapt to different industrial cooling
requirements. 6. Protection: Box-type industrial chillers have
perfect protection function, such as power wrong phase lack
protection, System high-voltage protection, System low voltage
protection, Double antifreeze protection, Compressor overload
protection, The insufficient frozen water cooling protection,
Prevent frequent start protection, Compressor built-in exhaust
temperature and coil overheat temperature protection and so on. 7.
Receive customized: The company accept all kinds of special
technical requirements of units to order, can be customized
explosion-proof, strong acid, strong alkali solution, cryogenic,
heterogeneous power supply, T3 conditions non-standard products. 8.
Pump & Water tank: Containing stainless steel water pump and
water tank inside the box chillers standard accessories; Pump is
lift, flow, adapt to the strong; Large capacity water tank, can
automatic replenishment, overflow, effectively buffer the load
change, the introduction of water temperature fluctuations. 9.
Microcomputer function: Many of the chiller with compression,
microcomputer automatic memory will be per compressor operation
time, start the next time it will be activated running less time
compressor. *0. Environmental protection refrigerants: Air cooled
low temperature condition (*0 C below) water chillers the Copeland
of the low temperature and environmental protection compressor for
R**4A refrigerants, higher efficiency, to live longer,
environmental protection and energy saving. In order to better
protect the atmosphere, it Can producte green environmental
protection etc cooling medium refrigeration and air conditioning
equipment not only in adopts HFC**7C and HFC**4A, but also in
HCFC*2. *1. Movement: *- 8HP of the box-type industrial chiller`s
bottom of the fuselage is equipped with a wheel, you can easily
move. Notes: (**5 deg. C temperature) default conditions: 1. The
parameters in the nominal conditions are as follows: chilled water
inlet / outlet water temperature is **0deg. C/ **5 deg. C; Ambient
temperature is *5 deg. C Chilled water side must add *5% ethylene
glycol solution or calcium chloride solution of *2% antifreeze 2.
Temperature conditions: Chilled water inlet temperature
range**2deg. C~ *5 deg. Cambient operating temperature 0 deg. C ~
*3 deg. C 3. The chiller uses a dedicated low-temperature
refrigerant R**4A 4. Host the actual head of the pump head, minus
the host internal head loss ( 1mH2O = 9.8kPa ) 5. Nominal
conditions evaporation device water side of the dirt coefficient is
0.**8 m • ° C / kW 6. Power standard: 3P- **0V - *0HZ, it is
recommended that the three-phase system, allowing the voltage
fluctuation of ± 5 %, the frequency fluctuations of ± 2%
