Description
1. Precise stable water temperature: As used for industrial
cooling, Low temperature water which produced by warter-cooled
chiller could send to the equipment and containers directly which
need to be cooling. 2. Y-depressurization start mode: Half a dense
screw water chiller use Y-depressurization start mode. 3. Capacity
adjustment: Screw water-cooled chiller according to the use of
Client load can automatically adjust load capacity. The standard
chiller capacity adjustment method using segmented or non-polar
uninstall way. Single machine can realize the four sections of
compressor capacity **0%**5%**0%**5%. 4. Perfect protection
function: Screw water-cooled chiller have perfect protection
function, such as power wrong phase lack protection, System
high-voltage protection, System low voltage protection, Double
antifreeze protection, Compressor overload protection, The
insufficient frozen water cooling protection, Prevent frequent
start protection, Compressor built-in exhaust temperature and coil
overheat temperature protection and so on. 5. Meet the temperature
requirements of various industries: Screw chillers in the use of
industrial cooling can be applied to a variety of cryogenic
cooling, add the appropriate antifreeze in the chilled water side
can be achieved 0C to - *5C the water temperature to suit different
industrial cooling requirements 6. Higher cooling energy
efficiency: As the use of central air conditioning with air -
conditioned boxes, fan coil and secondary heat exchanger used in
conjunction with, cooling energy efficiency ratio is the biggest
advantage of the water-cooled chillers. 7. External water-cooled
plate oil cooling device: In order to more fully the frozen oil and
refrigerants separation, Low temperature cold water chiller
external centrifugal efficient oil separator, it Can greatly reduce
in low temperature and stranded in the evaporator of frozen in oil.
To ensure that the compressor lubrication system security. At the
same time also improves the heat transfer effect of the evaporator.
8. Plus liquid spray technology: To further ensure compressor motor
not overheat, Screw water-cooled chiller use plus liquid spray
technology, with low temperature cold media on the motor cooling
directly. To ensure the long-term and stable operation of the
compressor. 9. Green environmental protection: In order to better
protect the atmosphere, it Can producte green environmental
protection etc cooling medium refrigeration and air conditioning
equipment not only in adopts HFC**7C and HFC**4A, but also in
HCFC*2. *0. Balance run: Many of the chiller with compression,
microcomputer automatic memory will be per compressor operation
time, start the next time it will be activated running less time
compressor. *1. Remote control: Each chiller with remote control
function, the computer controller is equipped with RS**5
communication interface standards, open communication protocol, all
kinds of building monitoring system connected even remote different
ground monitoring. *2. Cold water chiller recyclable: In today 's
increasingly tense energy, waste heat use will have long-term
economic value, on this basis, the Division I developed a heat
recovery chiller can be full recovery of the original go condensing
waste heat released into the environment. *3. Waste heat &
secondary condensation: Rely on waste heat generated when the pump
cooling system to take domestic hot water, without additional
consumption of electricity, fuel; Almost zero cost; No pollution,
no need to add other devices, just access to water pipeline, direct
access to hot water.
