Description
The RDLC***-A laser carving/cuts the control card the
superiority:
In the board card whole has a better anti-high-pressured,
anti-electrostatic disturbance ability;
The single-channel *4V power source power supply (also may use *6V
power source power supply, but does not recommend use),
may save the machine factory cost;
Multi-channel general big electric current IO, may facilitate the
function expansion;
Supports all brands, all capacity U plate, also the copy speed was
before edition system 3 times;
The board carries the **6M ultra large capacity nonvolatile
storage, no longer has the document size bottleneck
limit;
The system may self-check the bad road, and may format the memory,
the fault tolerance is good;
Two group independent digit/simulation power connection, the
software may adjust separately, facilitates a double laser
control;
But online promotion motherboard procedure, convenient factory
maintenance and customer function having custom-made;
But the online promotion starting picture (customer may
independently have custom-made starting picture, then downloads
through software);
The system bringing time system (may demonstrate year, month and
day, hardware encryption algorithm are stabler reliably);
The support customer processing man-hour looks at in advance (looks
at rate of accuracy **0% in advance, looks at time and actual
process period in advance
as precisely as a millisecond level);
Supports the machine the reverse gap compensatory
function;
Increased the Z axis linkage function;
Supports the hard spacing;
The consummation power failure continues carves the
function;
The support program starting replacement may elect (i.e. to be
possible starting replacement or does not reposition);
Supports the multi-locating point logic (then to establish many
locating points, from different locating point start
work);
All factory/user parameter may carry on the backup and the return
to original state (then some group of parameters
establishes in kneading board general as factory default exwork
parameter, simultaneously also may carry on a return
to original state to these default exwork parameter);
Specifications:
Main card size: **0mm x**0mm;
System work power source: **4V, is bigger than 3A;
System operating temperature: - *0 degrees ~*0 degrees
