Use: The mould and side harden and can shut the splendid attire pour the material thick liquid, put and maintain the solidification of foaming base body quietly , the side board bears the weight of the base body and carries on cutting, one yard of shelves , steaming raising again at the same time . Is it raise car to bear the weight of base body (with side board ) is it is it keep means of delivery of cauldron to steam to pass in and out to steam 

Third:Overturn-cutting

1.Step moblie(Fixed) cutting machine
2.Tilting plate machine
 

Use:After block wa cut,the tilting  table turns it *0 degree, and remove the waste slurry that at the bottom of block.It can increase the usage rate.

3.Tilting hoister
 

Use: Upset hoist make base body (bring mould , side board) in sky *0 of upset, is it is it cut platform or cut car to put to hang, the drawing of patterns is cut . In addition carry on group mould mould frame and side board that return that drawing of patterns get off, is it transport to pour carriage return pour circulation on the line to hang.

4.Semi-finished  hoister
 

Use:After cutting,semi-product hoist carry block to harden car for marshaling 

5.Vacuum suction hood
 

Use:After cutting,the waste slurry at the top shall be removed by vacuum,so the use ratio raise up. 

6.Hardening car
 

Use:The trolley is a carrier to carry the side plate and blank to cutter and leave autoclave

Forth:Finished Product Out Of Autoclave

1.Separator
 

Use:The separator is a special machine whose function is to separate the plaste block into piece,in order to be transfered and used.

2.Finished product hoister
 

Use:Carry the finished-product to packing line after autoclave,making final package. 

3.Autoclave