Sell DB125A Series electric clean water pump

These pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves.
For the correct functioning of the pump, use to pump clean water, or non-aggressive liquids only , without sand or other solid impurities.
They are qualified in domestic fitting, to increase the system pressure in aqueducts and for automatic water distribution by autocalve tanks and by hydrosphere units.

Pump Body: Cast Iron
Impeller: Brass
Mechanical Seal: Carbon / Ceramic / Stainless Steel

Single Phase
Heavy Duty Continuous Work
Motor Housing: Aluminum
Shaft: Carbon Steel / Stainless Steel
Insulation: Class B / Class F
Protection: IP*4 / IP*4
Cooling: External Ventilation

Liquid temperature up to *0Degree
Ambient temperature up to *0Degree
Total suction lift up to