Description

User Instruction

A.Charging: 

a)       Using ******0VAC to connect this product for charger. As shown below

b)       P****8 is able to charge other devices when you charging your P****8

c)       The capacity falls below *0% when the capacity blue lights is flashing, suggesting torecharge, the LCD lights flashing when product charging, the battery is full when the fullLCD lights lit.

d)       After charging is completed, disconnect the charging cable.
 Important:
1: Before using the unit, make sure that the product is fully charged, in order to achieve the best performance of the battery.
2: Charging of this deviceat least one time per three months.

C:LCD Indication.

 When ***2V output port connect with DC cable,”***2V” icon show up in LCD display and able to charge the device. If unplug the DC cable or current loading below *0mA,Voltage output deactivate after 1 minute,and “***2V” icon fade out in LCD display.

When *6*19V output port connect with DC cable,”*6*19V” icon show up in LCD display and able to charge the device. If unplug the DC cable or current loading below *0mA,Voltage output deactivate after 1 minute,and “*6*19V” icon fade out in LCD display.

When press and hold button in 2 second or with ***2V,****9V output voltage, 5V USB port output the voltage. ”5V USB” icon show up in LCD display showing that activate

Remark: When charging to other devices, LCD display icon fades out after *0 second

D: Power switch On/Off and key notes
1: switch on/off: Press and hold the button in 2 second to switch on, all output ports activate, LCD screen lights up.

 After shutdown, LCD screen switch off, all output ports are closed, the battery pack into sleep mode.
2: Power indication display: The button is pressed then LCD screen lights up continuous in *0 second
3: Sleep mode
When not using the product for a long time (1 minute), it will automatically enter the sleep mode, the LCD screen is off,
* Note: To make mobile power into sleep mode, you can:
A) Press and hold the button in 2 second
B) Unplug all the DC cable, automatically enter the sleep mode after 1 minute later
C) The power consumption in sleep mode is 0.*5MA.
E: Charging for your product:

1: charging for notebook computers.
A) The unit is equipped with 8 adapters can be adapted to most of brand name products on the market.
B) With DC cable (with ***2V/2A ,****9V / 3A two DC cable) and select the appropriate specifications of your laptop charging
C) Will be charging device is appropriate connected with the connector, DC plug and ready to charge your products
D) After charging is completed, remove the cable and connectors.