Sell corrosion resistance material

Description

GoodcreteDPS provides two effective mechanisms for concrete  protection. First, it gives good exclusiveness on the construction surface and it enhances the surface tension of water and other kinds of liquid (such as jet fuels and gasoline), preventing water (liquid) from penetrating into the concrete through the capillaries of concrete. And then through the crystallization process, it already can prevent water and moisture in the capillaries of concrete. The crystals not only have hydrophilic function but also have water absorption function; therefore it has dual wet resistance effect. In wet climates or in the conditions of having moisture, Goodcrete DPS water absorption function makes the crystals expand and fill the holes so as to prevent moisture extension. At the same time, Goodcrete DPS hydrophilic function makes the crystals grow along the direction of moisture source; thereby it forms a permanent wet barrier at the wet source. In dry climates, in the desorption process, the crystals release moisture and shrink to the initial size. The expanding and shrinking functions of crystals can make the concrete breathe continuously.
Goodcrete DPS makes the concrete have reasonable dryness, which has already used Goodcrete DPS. It reduces the water and moisture associated problems at the greatest degree.
Goodcrete DPS can also seal the cracks less than 0.3mm and improve the concrete strength. Therefore, using Goodcrete DPS, it can extend the service life of the buildings and greatly reduce the maintenance cost.
Goodcrete DPS can remove the dirt and mildew from the surface of concrete, bricks and stones and effectively prevent the generation of mold and mildew in the future. When the crystals grow, they can penetrate deep into the substrate pores and expel the dirt and impurities from the surface. Therefore, Goodcrete DPS is the best product used for maintaining the historical relics & the old buildings.
Characteristics:
1)Prevents penetration of chloride ions from deicing salts.
2)Reduces damage caused by repeated freeze and thaw cycles.
3)Provides long lasting internal waterproofing and moisture blocking from positive and negative sides of construction matrix.
4)Special exclusiveness to prevent the penetration of water and dirt.
5)Resists aggressive chemicals such as acids, caustic jet fuels and gasoline.
6)Protects reinforcing steel bars against corrosion without any negative effect on existing steel protection layer.
7)Enhances the adhesion of joint sealant and road markers.
8)Reduces Alkali Silica Reactions (ASR), and eliminates silicate dusting.
9)Increases concrete hardness, compressive strength and abrasion resistance.
*0)Anti- hydrostatic, construction is available in the condition of having hydrostatic.
*1)Seals hair cracking and thermal cracking, and prevents concrete scaling.
*2)Water-based (no solvent), non-toxic, environmentally friendly, can be used in a variety of conditions.
*3)Penetrates deep and no film.
*4)Crystallizes to waterproof, permanent protection.
*5)Simple construction: just spray it.
*6)Removes dirt and mildew, and prevents the mold generation.
Application:
 
Goodcrete DPS can be used for waterproof for all the concrete and cement structures and prevent other moisture associated problems. When it is used in the following circumstances, it can make more cost-effectiveness:
a)Airport Runways
b)Bridges
c)Aisles
d)Buildings
e)Concrete Roads-Highways
 
How does Goodcrete DPS work?
 
Goodcrete DPS penetrates below the surface and chemically reacts with the alkali substances and lime found in the concrete. This reaction can be divided into two stages: First, within the capillaries of the concrete, it will create a silica gel membrane and after the water of the silica gel membrane evaporates, the silica gel membrane will solidify into a crystalline structure. Second, through the reaction the solidifying crystal will get into the capillaries and small cracks of concrete , permanently sealing to improve its compactness yet allowing the concrete to breathe. Over a period of time the silica gel membrane hydrates and solidifies into a crystalline structure, increasing moisture vapor emissions both on the positive or negative side.Using Goodcrete DPS, the conctete can still breathe well.
 
a) Low viscosity( **3 cps)and surface active agents can make Goodcrete DPS penetrate deep into the concrete matrix.
b)In the concrete pores and capillaries, the catalyst makes it have a chemical reaction, resulting in the insoluble hydrophilic and absorbent crystals.
c)The crystals seal the concrete pores and capillaries to prevent the transmission of water and moisture of the positive or negative side of the concrete slab.
d)The crystals not only have hydrophilic function but also have water absorption function. In wet climates or in the conditions of having moisture, Goodcrete DPS water absorption function makes the crystals expand and fill the holes so as to prevent moisture extension.
e)Goodcrete DPS hydrophilic function makes the crystals grow along the direction of moisture source; thereby it forms a permanent wet barrier at the wet source.
f) In dry climates, in the desorption process, the crystals release moisture and shrink to the initial size. The expanding and shrinking functions of crystals can make the concrete breathe continuously.