Description
Yellowish powder
Product
Overview:
The brand “Liduo” compound
printing paste: It regards the unique natural plant and high
performance carboxymethyl starch (CMS) which are produced in Gansu
sub-plateau and semiarid region as the main material. We employ the
innovation technology and patent equipment to produce the new
generation of green printing auxiliary. It is also the ideal
product to replace the sodium alginate in the textile printing
industry. This printing paste has not only the advantages of high
yield of forming thickening agent, but also good rheological
properties, thixotropy, holding water capacity, screening, dilution
resistance, alkali and salt resistance. It also overcomes the
disadvantages of the traditional sodium alginate printing paste in
the printing process such as the low color yield and brilliance,
bad screening and short retention time of the original paste.
The performance/price ratio of this paste is much higher than
the sodium alginate and it is the most advanced printing paste
products at
present.This innovation technology and products have
also already passed through the Gansu Province Technological
Achievements Acceptance and the Gansu Province New Product
Identification in ***1. The achievements have reached the leading
domestic level, which fills up the domestic fine chemical gap in
the area of printing paste new
materials.
Typical
properties:
Appearance: light
yellow powder
Moisture: ≤
*0%
Ion
type: anion
pH:
1%, 8.***2.0
Viscosity: *0oC, 5% ≥ *0,**0
mPa.s; 8% ≥ **0,**0 mPa.s (NDJ*8S, No.4,
6r/min)
Holding water capacity:
≤0.*5mm/5min
Dissolubility: rapid dissolubility
in cold water
Degree of substitution:
≥0.8
Storage time of the
paste: less than *0 days
Compatibility: good compatibility
with the sodium alginate, anionic and nonionic synthetic thickening
agent, textile auxiliaries and reactive
dye
Depasting:
good
Applicable
Scope:
Applicable dye: reactive
dye.
Applicable process: conventional
printing technology.
Applicable equipment: rotary and
flat screen printing machine.
Applicable fabrics: TQHY*1
compound printing paste is applicable to middle high cellulose
fiber fabrics. TQHY*2 compound printing paste is applicable to
middle low cellulose fiber fabrics.
Directions:
1. It
has the same usage method with the sodium alginate pastes, there is
no need to be changed.
2. Put
the sodium carbonate, sodium bicarbonate, reserve salt-S, urea
directly into the cold water which was soften by sodium
hexametaphosphate. When it is blended and fully dissolved, Sprinkle
the printing paste into the water (***0 r/min, *0min). The original
paste is made while the paste is dissolved
completely.
3. Place
the original paste should for ***2 hours, and then strain over the
dye liquor, mix uniformly to use in the screening
machine.
4. Add
****0% sodium alginate when apply TQHY*2 compound printing paste to
the middle high cellulose fiber
fabrics.
Cautions:
1. According
to the different techniques and fabrics, adjust the usage
proportion of the printing paste to use in the screening
machine.
2. Aiming
at the different techniques and fabrics, adjust the usage of
auxiliary agent.
3. Take
advice to use the plastic or stainless steel bucket to beat,
because the viscosity of the paste decreases when adding metal ion
Ca2+, Mg2+, Fe2+, etc.
4. Use
the water to dissolve the dye liquor (the temperature must be *0oC
below), and strain over the original paste. Because the viscosity
of the printing paste decreases when the original paste and color
paste are heated by the hot
water.
5. The
color paste should be used on that day and not be suitable for
storage over long period.