Description

Model：AK-RD**7

Name:  self-copy/duplicating /copy/duplicating face to face RF remote control (AK-RD**7)

 Technical parameters

1.Operating voltage: DC*2V

2.Operating current: *0MA

3.Frequency available: Fixed frequency **5/**3.*2MHz (We can do customized frequency)

4.Adjustable frequency:**0MHz***0MHz

5.Ambient temperature : **0 °C ~ **0 °C

6.Use:Kelvin *-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors , Gates doors, Alarm systems etc. Fixed frequency (**3.*2mhz or **5mhz) for copying *9.*9% common fixed and learning code remote controls. 

Face to face copy the functions of your original remote by this *-channel RF remote control duplicator with code learning functions and you'll always have a back up.

Duplicate Your Existing Remote Controllers: 

1.                  Vehicle central locking systems  

2.                   Garage  doors  

3.                   Electronic  gates  

4.                   Electrical  appliances  

5.                   Car  sunroofs  

6.                  Heating  systems

Easy to install and use, the 4 channel remote control system lets you take control of your gadgets,  car and home or garage.

Works with the following remote control modules (please check your existing remote control before ordering): Your remotes also should be Fixed code or Learning code. 

•***0, ***2,  FP**7, HT*2D ,  HT*2E ,  PT***0,   S****1 ,S****2 ,S****3 ,S****4, SMC**8.... etc          

Please note this does not copy rolling code 

Methods of operation

1, Clear out code:

Press A and B at the same time, two seconds later, LED  flashes three times, followed by a continuous fast blinking. Indicates that the remote control code stored was deleted.

2, Duplicating (learning)

Right Hands press original remote control A, and left hand press remote control duplicator A', 2 remote controls put together as close as possible, while pressing the remote controls two match button,(eg: A-A’,B-B’) three seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. That's mean successfully copied.

3, Recovery code

Press A and C at same time , 3 seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that the original remote control codes have been restored.

The other way, you can delete all and relearn them again.