ERMAKSAN's CPP ( COMBINED PLASMA PUNCH PRESS ) series proven quality and experience in production of sheet metal workbenches is being presented to the utility of our clients open to technology and continuous innovation. Strong mono block rigid C type body built up by welded steel and stress removed high acceleration axes designed to allow sheet loading from 3 sides economically lets the operation to be watched easily.
 

The combination of HiFocus sensitive plasma cutting and hydraulic punching on a strong body. The moving sheet on X Y axes on a stainless with roller balls type table by clamps can be cut as sensitive as required contour by servo motorized automatic height adjusted torch at plasma unit after being processed by perforating and/or forming operations at punch unit. It realizes cutting and perforating processes at high speed and accuracy, and has the capability aimed at mass production. An alternative cutting process in comparison to other high cost cuttings. Furthermore the production period will be shortened on these kind combined workbenches because the worksheet will not be taken apart and transferred to different workbenches.
 

• Hi-Focus Quality: Mild steel and aluminum (0,***2 mm). 5/6 bar plasma and swirl gases, direct edge cutting with narrow gap small diameter nozzle, cutting at DIN EN ISO ***3 quality, long cathode and nozzle life-time, min. gas consumption
• Hi-Focus INOX: Stainless steel **6 mm, dross-free clean cutting, 5/6 bar plasma and swirl gases, direct edge cutting with narrow gap small diameter nozzle, cutting at DIN EN ISO ***3 quality, long cathode and nozzle life-time, min. gas consumption
• Hi- Focus Speed: Mild steel ***2 mm, 8 bar plasma and swirl gas, high speed cutting (approx. 3 times), sometimes small cutting inclination angle.

Advanced Software for ERMAK CPP

• LANTEK EXPERT II Combinations Plus Module : The operations of drown at the main software or imported from any CAD software part are designated by LANTEK as automatically according to the previously determined criteria as punching or plasma cutting. Automatic nesting (best nesting to the sheet without shrinkage) provides cost advantage.

Automatic Clearance control IHT PCS ***0

• When traveling downwards the vertical LINEAR DRIVE finds the surface of the work piece by smooth tactile touching, irrespective of surface conditions, such as rust or dirt, stops and moves to the preselected ignition height position. After ignition, it moves to the preset cutting height. The arc voltage is monitored during the cutting process. Clearance control is maintained by comparison of nominal arc voltage to the real arc voltage. Adjustments of all clearances may be preselected in millimeters or inches.
   

• X, Y, C, HiFocus Plasma Generator + Automatic Servo Motorized Height Control (Z)
• Bosch Rexroth VSP *6 CNC controller Industrial PC
• *2" TFT Colored High Resolution Touch Screen
• Windows XP operating system
• USB entrance at panel
• Protective USB (Power Supply) for electricity cut off and voltage undulation
• ETHERNET Interface for Communication and Network Connection between the office and machine
• The operator panel activates easily the velocity of axes, clamp functions, reference positions, trap and tool and punch functions.
• NosERMAK sheet holder clamps
• Mobil Command Foot Pedal
• Automatic Repositioning (for sheets wider than ***0 mm and for zones under clamps
• Check of work zone by CAD/CAM
• Warning Lamp
• Brushed Type Table
• Cooler
• Automatic CNC controlled trap (Scrap / Part discrimination)
• ERMAK Biemmeti Thick Turret adaptor from D station to A station round 8, *0, *0 mm, rectangular 4x*8 mm ( 2 nos. ), square *4x*4 mm
• CAD/CAM Software IANTEK EXPERT COMBINATION
• Standard FULL Automatic Nesting (1 nos. software,! nos. dongle), postprocessor
• Machine Instruction and Maintenance Manual ERMAK Lantek CAD/CAM training CO for easy usage
• KJELBERG: Hi-Focus **0 PLASMA GENERATOR TORCH UNIT with rustproof option
• IHT PCS***0 Automatic CNC Controlled Motorized Height Control Unit

• ERMAK-Biemmeti octet Multi Tool D Station

 Round 5 mm, 6 mm, 8 mm, *2.7 mm Rectangular *0x5 mm Rectangular 3x*4 mm Triangle *4,**5 mm, *0 degree Square *0 mm
 Rectangular *0x5 mm
 Rectangular 3x*4 mm
 Triangle *4,**5 mm *0 degree
 Square *0 mm
 

• Wilson Tool Octet Thick Turret D Station

 Round 4 mm, 7 mm, *0,5 mm
 Oval *2x5 mm
 Rectangular *2x2,5 mm
 Rectangular *0x5 mm
 Square 8 mm
 Triangle *4,**5 mm *0 degree

• Adaptor for B, C stations
• Optional a,b,c,d type adaptors and stations
• Tools for different punching shapes and forming applications
• D type tools for ******5 stations
• Additional Calmps
• Coated tools for stainless steel punching Mechanic safety for security
• Mechanic safety for security
• Infrared Cat.4 Light Guard Body Protection confirms CE
• Second user dongle for LANTEK CAD/CAM
• Plasma Application with Rotative Head Punch Press Absolute Servo Synchronic Zero Gap Tl, T2 axes
• Special sheet holder clamps for different capacities and thicknesses (after than 6 mm)

Ge Fanuc Series *8i-Pb controller has *0,4" color LCD screen, **2 KB part program memory, all related punch functions, program transfer availabilty with PCMCIA and ETHERNET, worldwide Fanuc Service advantage is being used on this machine.

Ergonomically designed control panel can be moved around machine easily. Protective UPS (Power source) is included for electricity cut off and voltage undulation.