FOB Price
Obtener el precio más reciente( Negotiable )
|Minimum Order
Place of Origin:
Henan, China
Price for Minimum Order:
-
Minimum Order Quantity:
1 Set
Packaging Detail:
naked+plywood box
Delivery Time:
20 working days after payment
Supplying Ability:
100 Set per Month
Payment Type:
L/C, T/T
China
Persona de contacto Mr. Jack
North Side of Xin-Chang Road, Xinxiiang, Henan
Brief Introduction
- Four-cable paina grab is of new design, reasonable structure, with dead weight ratio of material and grad to be 1.5~1.*2 and full capacity of *5~**0%, is a wonderful grab for loose material.
Characteristics
Comparing to the traditional four-rope grad, it has the following characteristics:
- the lower support beam is shorter, with well strength and light dead weight.
- bush material for main point is of bearing steel, that the service life can be prolonged 4~5times.
- overlaying welding technique used on the edge plate to improve impact force and abrasion resistance.
- multi-layer seal process on pulley to reach water-tight and dust proof, that can be used under water.
- clearance between edge plate is small (0.3~1mm), that the working area can be kept clean.
- the whole structure is difficult to deform.
Main Technical Parameter
- Volume: From 1 to *5 (loose material) m3;
- Type: It can be divided into light, middle and heavy type according to the material it will be grabbed;
- Material gravity: It can be used for almost all material as coal, ore and so on;
- Weight of material to be grabbed: The max. Weight of material to be grab is *0t, and we can design and manufacture according to your requirements;
- Pulley ratio: The pulley ratio of this type of grab can be 3, 4, 5 or 6;
- Number of rope for open-close: 2;
- Number of rope for hoist-lower: 2;
- Wire rope diameter: Changed from *4mm to *5mm, or according to work requirements;
- Pulley diameter: Ranged from **0mm to **0 mm, or according to work requirement;
- Times needed for open-close: About *4s;
- Max. Open size: From 1.8m to 6.0m;
- Other technical parameter: Other parameter can be designed and fabricated according to real requirements.
Manufacture Period
- Manufacture period for one set of such grab is *0 working days after receiving the payment advance;
HS Code
- *******0 (that the custom tax can be checked correspondingly)
Package and Transportation
- The four-cable paina grab can be transported by container, bulk cargo or train with main structure naked or covered by rain-proof clothes;
Payment Terms
- Negotiable.