Description

Digital satellite receiver for digital TV and radio programs.
Main features are a **0 MHz processor the DM **0 HD supports the Linux TV API
Experience high definition TV on your DVB

*0/**0 compatible Ethernet Interface
HDMI connection

Technical data:
**0 MHz MIPS processor
Enigma 2, Linux Operating System
2 x LED - display
MPEG*2 / H. **4 Hardware decoding
Tuner: DVB-S2
1 x Smart Card Reader (Dreamcrypt CA)
Service Mini-USB
*0/**0Mbps Ethernet Interface
1 x Scart (RGB, CVBS, YUV or S-Video)
HDMI
Analog modem
S / PDIF optical port
*4 MB Flash, **6 MB RAM
Unlimited channel lists for TV / Radio
Channel change in less than a second
Automatic channel search
Supports directly bouquet-lists
Supports EPG (electronic program guide)
Teletext Decoder
Supports multiple LNB-Switching control (DiSEqC)
OSD in many languages? ? And skin-support
External *2V power supply

DVB DM **0 HD Specifications:
DBS-Tuner DVB-S2:

Input frequency range **0...***0 MHz
Demodulation DVB-S (QPSK), DVB-S2 (8PSK, QPSK)
Symbol Rate DVB-S: 2...*5 Mbaud / s, SCPC / MCPC
DVB-S2: ****1 Mbaud / s (8PSK), *0 - *0 Mbaud / s (QPSK)

Video decoder:
Video compression MPEG*2 and MPEG*1 compatible, H. **4
4: 3 / *6: 9
Letterbox for 4: 3 TV-Device

Audio coding:
Audio compression MPEG*1 & MPEG*2 Layer I and II
Audio Mode Dual (main / sub), Stereo
Sampling frequencies *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz

Output analog:
Output Level L / R 0, 5 Vss on **0 Ohm
THD> *0 dB (1 kHz)
Crosstalk < **5 dB

Output digital:
Output Level 0, 5 Vss on *5 Ohm
Sampling frequencies *2 kHz, *4.1 kHz, *8 kHz
S / PDIF-Output optical, Toslink

Video output:
Output Level 1 Vpp + / - 0.3 dB on *5 Ohm

Video parameter:
Input level 1 Vpp + / - 0.3 dB on *5 Ohm
Teletext filter in conformity with ETS **0 **2 Standard

TV-Scart:
Output: CVBS, YUV, RGB, S-Video

Mini USB service interface
Function Update of Firmware

Ethernet:
*0/**0 MBit compatible interface
Function Update of Firmware

Analog Modem:
Analog modem for Internet access

LNB power supply:
LNB Current **0mA max. In short circuit protection
LNB Voltage vertical < *4V without load, > *1, 5 V at **0mA
LNB Voltage horizontal < *0V without load, > *7, 3 V at **0mA
LNB shut-off in standby mode

Number of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control

Power consumption:
< *2W at *2V operation
< 1W Standby

Input voltage:

External power supply:
Input:
******0V AC / ****0Hz / 0, 6 A

Output:
*2V = / 3, 0 A

General:
Ambient temperature **5 ° C. **5 ° C
Humidity < *0%
Dimensions (W x D x H): **5 mm x **0 mm x *0 mm