Sell Tiny210V2 S5PV210 ARM Cortex-A8 Samsung single board

Description

HardWare
CPU Module-CM-Tiny**0V2 CPU module
1 GHz Samsung S5PV**0 with PowerVR SGX**0 graphics engine
**2MB DDR2 RAM, **-bit data bus, **0 MHz
MLC NAND Flash: 2GB
Two **-pin and two **-pin 2.0mm spaced DIP connectors for mounting to motherboard
Ethernet Chip: DM***0AEP
Audio Codec Chip: WM***0
Four user LEDs (green)
Supply voltage from 2V to 6V
CPU module dimensions: *4x *5 x *1mm
Software: Android 4.0, Android 2.3, Linux 2.6.*5, Qtopia*2.2.0/Qt*4.4.3/Qt*4.7
Mother board
We provide the Tiny**0V2SDK mother board for CM-Tiny**0V2 CPU board.

1. Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port, and one was lead by SCON interface
2. AV CCD Camera In: Integrated TVP***0 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera
3. Expand MiniPCI interface: expand 3G Module
4. Serial Port: 4 serial port, two of them have been converted to RS**2, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
5. keys: 8 key
6. RJ*5 Ethernet port: using DM***0AEP(On CPU board), *0/**0M adaptive
7. Audio input and output: using the WM***0 professional audio chip(On cpu board), containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
8. USB Slave: 1 Road, the USB 2.0 specification
9. Buzzer: 1, control by the PWM0
*0. EEPROM: AT*4C*8 (**6 Byte) for I2C test
*1. LCD Interface: 2 LCD interface, support 3.5 "**9" full color TFT display LCD
*2. Capacitive touch screen: I2C-based interface, on the *5Pin LCD connector
*3. Resistive touch screen: *-wired Touchscreen interface, On *0Pin LCD connector
*4. SDIO interface: used to connect the SD WiFi module and other
*5. CMOS Camera interface: used to connect CMOS camera
*6. RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
*7. Gravity sensor Support
*8. PCB layer: 2
*9. PCB size: **0 x **0mm, can be easily fixed all kinds of LCD modules, especially the *-inch LCD module
*0. Power supply: DC*5V

For more details�please feel free to contact COREWIND
�