Sell switchboard matting

Description

 Our Switchboard matting / high voltage insulation rubber was tested according to TNB technical specification :
A) BS EN ******1 , Electrical strength of insulating materials - Part 1 &
B) BS EN ****1 Clause 5.6.3.4 , Voltage Withstand Test

Product Characteristic :-
1) Material : NATURAL RUBBER ( NR ) BASE POLYMER

2) Brand Name : GS-SM Switchboard Matting / High Voltage Insulation Rubber Mat *- with Anti Slip ( Diamond Plate ) on Top Surface , Withstood *0kV ( Class 2 ) , 5mm Nominal Thickness , BLACK Colour with TNBR QATS Test Certificate No. :TNBR/HVLT*******2/**4 ( BS EN ******1:***8 ) & TNBR/HVLT*******4/**4 ( BS EN ****1 : ***9 Clause 5.6.3.4 )

3) Brand Name : GS-SMG Switchboard Matting / High Voltage Insulation Rubber Mat *- with Anti Slip ( Diamond Plate ) on Top Surface , Withstood *0kV( Class 3 ) , 5mmNominal Thickness , GREY Colour with TNBR QATS Test Certificate No. :TNBR/HVLT*******4/**1 ( BS EN ****1 : ***9 Clause 5.6.3.4 )

4) Surface finishing :
with anti slip diamond plate surface to provide safe working environment
5) Specific gravity : ± 1.*0 g/cm³
6) Hardness : *0 ± 5 Shore A
7) Elongation : Min ± **0 %
8) Tensile Strength : Min ± 5 MPa

9)OURavailable Dimension :
Material Type : Natural Rubber ( NR ) base polymer with anti slip diamond plate
BS EN ****1 : ***9 Class 2 ( Withstood *0kV ) , GS-SM
A) Model : GS-SM 1 , Switchboard Matting , ( Black colour ) ,
5mm Tk x 1,**0mm (1 m ) Width x 1,**0mm ( 1 m ) Length / pc ( ~ 7.5kgs / pc )
B) Model : GS-SM 2 , Switchboard Matting , ( Black colour ) ,
5mmTk x 1,**0mm (1 m ) Width x 3,**0mm ( 3 m ) Length / roll ( ~ *2.5kgs / pc )
C) Model : GS-SM 3 , Switchboard Matting , ( Black colour ) ,
5mmTk x 1,**0mm (1 m ) Width x 5,**0mm ( 5 m ) Length / roll ( ~ *7.5kgs / pc )

Material Type : Natural Rubber ( NR ) base polymer with anti slip diamond plate
BS EN ****1:***9 Class 3 ( Withstood *0kV ) , GS-SMG
A) Model : GS-SMG 1 , Switchboard Matting , ( Grey colour ) ,
5mm Tk x 1,**0mm (1 m ) Width x 1,**0mm ( 1 m ) Length / pc ( ~ 7.5kgs / pc )
B) Model : GS-SMG 2 , Switchboard Matting , ( Grey colour ) ,
5mmTk x 1,**0mm (1 m ) Width x 3,**0mm ( 3 m ) Length / roll ( ~ *2.5kgs / pc )
C) Model : GS-SMG 3 , Switchboard Matting , ( Grey colour ) ,
5mmTk x 1,**0mm (1 m ) Width x 5,**0mm ( 5 m ) Length / roll ( ~ *7.5kgs / pc )

*0) Scope , Usage & Application :-
High Voltage Insulation Rubber Mats / Non Conductive Mats - Most commonly called Switchboard matting, these non-conductive mats protect workers from deadly shocks generated by high voltage equipment.

High Voltage Insulation Rubber mats are NORMALLY used as floor covering electrical panels at Power Transformer Rooms , Sub-Station , High Voltage Panels , LT & HT Labs, Control Panels etc . it acts as a safety pre-caution for workers from electrical shock whether they are involved directly in electricity generation, transmission, distribution or other usage .

Eventually , the High Voltage Insulation Rubber Mats need to be tested ( with proven data from LOCAL or international accredited testing body ) before being placed at electrical generator rooms .

Carelessness of handling electrical apparatus or Mis-used of high voltage insulation rubber sheets / mats could be harmful to workers . for example , Class 0 ( *0kV ) or Class 1 ( *0 kV ) High Voltage Insulation Rubber Mats placed at Class 2 , *0 kV working environment of electrical generator rooms .

Choosing the correct High Voltage Insulation Rubber Mat / Sheet is extremely IMPORTANT , These mats not only save money, but they save lives because a human life is above everything . We strongly recommend our customers to use one class higher ( * if your cost persists ) than the voltage working environment to secure safety of workers . Our goal is to assist to achieve " ZERO " industrial accidents resulted from voltage leakage .