Sell Precious Metal Dispersion Analyzer

Description

Main Property

1. A variety of workflows- TPD, TPR, TPO, TPSR, Pulse Titration, Pretreatment and BET Specific Surface Area

2. Multiple Independent Gassource- In addition to carrier gas and reaction gas, each for independent control and mixes in scale.

3. Multiple Gas Joints - 3 for carrier gas and 3 for reaction gas

4. Steam Generator – It is equipped with a saturated steam generator and convenient to use reaction gas like liquid NH3.

5. Can be connected to GC or MS – It can be connected to the gas chromatography (GC) or mass spectroscopy (MS).

6. Auxiliary Detector – The instrument can output a voltage signal which is convenient to connect gas auxiliary detector, such as FID.

7. Material Structure - Stainless steel piping, seal for fluorine rubber, ask company for special custom if applied in special environment.

Precise Control

1. Flow Control – Using mass flow controller (MFC) software control, the flow is adjustable between *0 to **0sccm and software controls gas coefficient.

2. High Temperature Furnace – The highest temperature is ***0℃, and the stove heating rate can be adjustable from 1℃/min to *0℃/min.

3.Air Refrigeration – Open (shell type) furnace can be quickly cooling and optional refrigerator achieving rapid refrigeration.

4. Optional Cryotrap – The temperature can be rising from ***0℃.

5.Temperature Control – Piping, steam generator, stove and TCD temperature can all be controlled by digit.

6. Thermal Conductivity Cell Detector – *-arm rhenium tungsten TCD has extremely high linear, accuracy, sensitivity and stability.

7. Very small dead volume -Small volume valve and 3 mm pipe can reduce dead volume, thus reduce the deviation of the peak.

Easy Operation

1. Sample Support – U type pipe of large size can be convenient for sample loading and cleaning, and can add powder, rod or shot sample.

2. Sample Loading – Sample tube free of taking down is convenient to load samples. 

Safety

1. Heating Pipeline – All the pipeline, valve and liquid carburetor are heated to prevent condensation.

2.Safety – Independent furnace temperature thermal protection, sealing pressure reducing valve, current circuit breaker, fuse, the system design has timely security protection.

Parameter