Weight<*0g</div>
Holes2/4
Applicable Burs1.***1.*0mm
Chuck Power>4kg
Instruction for
user
1. Applied burs: the shank diameter
must confirm to ISO standard of 1.***1.*0mm so don’t use bent,
irregularly worn, damaged or non-standard burs.
2. Changing burs: For push-button
type, press the head cap until the head cap latch down, and load or
unload the burs. Insert the burs into the head until it stops or
it’s easy to fall off. For screw type, use the matched chuck
wrench with the bayonet mounted on the side outlet of cartridge
head, then push the side knob into the middle hole in the head cap;
make a turn in the counter-clockwise direction and burs are ready
to remove. To mount a bur, turn the knob in the clockwise
direction.
3. Changing cartridges: Unload the
cap with special wrench provided by our company and remove the
broken cartridge. For mounting new cartridge, insert the cartridge
into the head, push the cartridge down, turn and further tighten
with the head cap wrench.
Â
Cleaning and
maintenance
Clean the surface of handpiece with
the content of *0% alcohol or containing ammonium, acid, and
chlorine disinfection liquid. Don’t put hand into the
disinfecting liquid to clean. Lubricate the handpiece prior to the
high temperature disinfection. The cartridge must be lubricated
twice daily. The lack of right cleaning maintenance can make
handpiece to premature aging, while proper cleaning and maintenance
will make its service life longer.
The handpiece can also be directly
put into the sterilizing furnace with **5℃ to sterilize
for *5 minutes, or **1℃ for *0 minutes.
Â
Use safety
instruction
If the handpiece is not used for a
long time, it must be cleaned and sterilized according to the
instructions, and stored in dry place. If handpiece makes abnormal
noise, or excessively swing, or bur is loose and some conditions
like this, please contact the local product suppliers, or Sunda
Dental.
Â
Cautions
The products by our company are
used only for dental professionals during the dental treatment so
other uses are not recommended. This product is high-speed turbine
handpiece, so please use with caution. Product packaging and
transportation requirements are stipulated in the contract, and the
products should be stored in the package indoor with the relative
humidity of not more than *0%, no corrosive gas and
well-ventilated. In order to prevent medical accidents, please
follow the instructions to use. The responsibility of the user
include: only use not damaged tools; make sure the correct use of
the handpiece; prevent patient and the third party from any danger;
prevent the products from any pollution; please don't spray or jet
on wound in case thrombus will form or skin will be affected.
About us
Sunda Dental Instruments Co. Ltd has
decades of experience of producing and trading dental instruments.
Since its establishment, it has been committed to both producing
and sales. Now, we have a sales office in Beijing and a production
base in Foshan, Guangdong. In order to supply you with more
advanced dental instruments, we concentrate with more efforts on
research and development of dental instruments. The S series of air
light high-speed handpieces have won patent right in
China.
Â
To give you the best performance is our goal. So, not only we
supply the dental products of highest quality to you, but also do
we provide the best service ***- fast delivery, standard packing
and perfect after-sale service ***- to you. Therefore, in the
recent years, our products are well received by the customers both
inside and outside China and have spread over East Asia, South
Asia, Europe and some countries in North America.
Â
High-speed handpieces and accessories by our company are made
of the best materials and featured by good performance and long
lifetime.
Â
We would be delighted to establish business relationships with
you.
