Description
SBS**9 type is a synthetic rubber-based, adding tackifier resins,
accelerators, antioxidants, stabilizers, organic solvents, such as
by a special process refined from volatile one-component drying
adhesive. Most of the imports of raw materials, based on its
excellent quality and good construction performance, much of the
building decoration industry of all ages, has become the main
domestic and international construction decoration industry with
glue.
Used for:
1. SBS**9 can be used for wood, plywood, fire board, MDF, polymer
plates, Mianqi board, aluminum plate and other sheet metal bonding
between;
2. SBS**9 can also be used for interior decoration, art
advertising, automotive interior. Especially for high-grade villas,
luxury hotels, Fortune Plaza, the noble district, the headquarters
base and other high-grade, strict requirements of the refined
decoration.
Performance and features:
1. Selection rigorous, glue density is small, brushing area *0%
larger than ordinary glue.
2. The environmental indicators are much better than the national
standard, in line with "Olympic environmental guidelines."
3. Solid content of high, saving glue at the same time does not
affect the bonding effect.
4. Super-strong initial adhesion.
5. Transparency, good smell, in line with China\'s environmental
labeling product certification, the proper use does not affect
human health.
Packing:
*5L × 1 barrel; 3L × 6 barrels per CTN
How to use:
1. The adhesive surface of the grease, dirt and other dirt wipe,
and then fight the hair dry.
2. With the scraper or brush in the adhesive surface from the
inside out evenly coated (if a large area of bonding, it is
recommended in the two adhesive surface at the same time glue),
room temperature, dry *0 to *0 minutes (depending on the
construction Temperature and humidity may be, with a layer of
slightly sticky hands shall prevail).
3. Once the alignment surface, from the inside out (squeeze out
bubbles), with a rubber hammer or wood hammer percussion
compaction, *4 hours after the use of strength can be achieved.
4. SBS**9 mainly used in interior decoration, should not be used in
the outdoors where the sun straight. If it must be used outdoors,
it should be fully dry glue curing, usually *2 hours (*3 ºC); such
as direct outdoor construction, you should take the necessary
measures to avoid the dark until the full dry curing before use. If
used at low temperatures, should also make the glue fully dry
curing.
5. As the market a wide variety of adhesive materials, the normal
method of bonding is not some special adhesive materials, such as
bonding the larger density of the MDF, it should be the second MDF
construction: first In the infiltration of large and need to glue
parts of the brushing glue to fully dry hardening (about *0
minutes), then the normal method of construction. This will be able
to penetrate the larger density of the MDF and other materials
firmly bonded together.
6. Depending on the adhesive material per square meter of glue is
about **0 grams to **0 grams.
Note:
1. The product is three types of dangerous goods, ventilation
should be used when the fire.
2. Keep out of reach of children.
3. Store and transport away from fire and heat, is strictly
prohibited sun exposure; according to the inflammable goods storage
transport, the use of empty packaging barrels with Note that
fire prevention.
4. SBS**9 mainly used in interior decoration, should not be used in
the outdoors where direct sunlight, outdoor decoration, the best
choice of other models of the company\'s products.
5. When you open the lid, press the cover surface, so as to avoid
glue with pressure sprang.
6. Room temperature shelf life of *8 months, more than shelf-life,
such as glue is not bad, you can still use.
7. Adhesive aluminum composite panels, fireproof panels and other
dense material, the need to drill a number of holes in the
substrate, so as not to stick after the drum package.
8. Outdoor use, the adhesive seam to use plastic potting to deal
with plastic, so as not to seepage open glue.
9. Due to the difference of construction environment and applicable
materials, it is recommended to determine the applicability of the
product through experiments. The Company will not be responsible
for the loss caused by the user\'s untested or violation of the
technological requirements.
The implementation of standards:
Q / CQS*******7
