Sell HD DVR Hidden Camera Watch - factory price

Description

HD camera watch manual

Foreword

 First of all, thank you for purchasing this product, to use this product correct and easily, please carefully read the instructions before use.

Product Features:

 1. The watch function

2. The camera features

3. The video features

4.The recording function

5. Motion detection function

6. The infrared light function

Waterproof Description:

7. Webcam function

To make a better use of the waterproof capability, pls strictly comply with the following operations:

l        Strict distinct the microphone sealed knot from the microphone sound-through knob.

Please strict distinguish the difference of the microphone knob with USB knob on the above picture. Do not use them interchangeably, otherwise any of the waterproof and dustproof effect would not be achieved, even resulting in a damage to the product.

l        A:Both MIC1 and B-MIC2 are the microphone hole knobs, with a high degree of consistency

l        AMIC1 with metal knob through the sound hole is in the knob to the center of a hole (see below), which is for the sound conduction. Under a good environment, it is recommended to use the knob to record a video while also being able to synchronize the input sound.

l         

B:MIC2 is the microphone sealing knob without sound hole in the inner part of the knob, there is a waterproof seal pads to seal the microphone hole, which we recommend to use the knob under a harsh environment to protect the microphone from water. The knob could prevent splashes and dust into the microphone hole, while external sounds is blocked. Thus once the microphone hole is spun on the knob, the recorded video will not with a synchronized sound.

Note: USB knob is a non- perforated metal seal knob, within a plastic seal pad as well. No matter what circumstances, please tighten the knob to prevent outside dust or liquid into the product when using this product, affecting the function of internal electronic components and the USB interface.

l                             All the water knob should be sure to tighten when in use.

Note: Check the USB sealing knob and microphone seal knob sealing pad. I they are off, please do not use them as the waterproof knob, and immediately switch to alternate water knob.

Third The analysis of  Figure

Forth  Functional instructions

A bit primary digital and dial the corresponding:

2  Boot / Video

8 Recording / motion detection

*0 Camera / infrared light

3 Checking the time

4  Microphone 

6  Camera

9  USB

*2  Indicator

***8  Infrared light

1.Switch machines: on the off mode, long press the key 2, then the red light long bright, with the blue light flashing just once, enter into the standby mode, long press the key 2 , then the machine shut down.

2. Video: on the standby mode, short press the key 2, the red and blue after the light went out at the same time, going out into the video. Long-Press 2 to stop and save the current video data.

3. Picture: standby, short press the key *0, red light is off, the long bright blue light to enter the 3.camera mode, short press the *0 key, blue lights flashing, take one photo and save.

4. IR LED: In standby mode, press key *0, red and blue lights flash alternately three times, then the infrared lights on. Long press key *0, red light and blue light flashing alternately three times, then the infrared light off.

5.Recording: the standby mode, press key 8, blue light flashing, red light and blue light off simultaneously, entering the recording. Long press key 2 to save the recording.

6.Motion detection: the standby mode, press and hold the 8 key, red light and blue light flashing twice then off, entering the state of motion detection. When detecting a moving object, it is in the state of video. While no moving objects within a minute it will save the video into the standby state of motion detection. Long press key 2 for the preservation of information.

7.Webcam: In standby mode, connect the product to the computer. Then you can video chat (first installation CD in the computer came with the drive).

8. The time synchronization: Double-click the time to modify the software, then you can achieve the machine and the computer time synchronization (first CD that came with the software installed on your computer).

9. Reset: When the machine is operating abnormal, press key *0then key 2to reset.

*0.Charging: Insert one end of the USB extension cable into the USB port of the machine, then the other end into the computer or charger USB port,charging. Slow flashing of the red light and the blue light, Alternating for charging. Long bright blue light when it is full charged.

Fifth note:

1.low power indicator (red light flashes for *0 seconds to shutdown)

2.Card full indicator (red, blue flashes 5 off at the same time and then off )

3.The machine built-in high-capacity polymer lithium battery. In the case of fully charged, unplug the power, the battery will automatically protect and automatically stop charging in order to avoid the battery is charging bad. In the case of unplug the machine, the battery in the state of protection while can not be switched. for your normal use, please activate the battery through connecting the machine with the charger or computer before normal use.

4.connected to the computer: Connect computer to read the disk in the shutdown state. According to the differences in computer configuration / system or machine memory size, the time of reading the disk might have a slightly difference. Please be patient during this period. It is best not to press the button operation, so as not to impact on computer recognition hardware. If after a long time without recognition to a removable disk, you can try to re-insert or please make sure that your operating system / drivers / USB interface cable is functioned normal or not. When unplugging the machine, it is best to carry out in accordance with the normal operating procedures, so as not to damage the computer or the machine.

5.For the reading of the file with connected to the computer or charging the charger, the best connection is, first connect the data cable to the machine and then connect the computer or charger.

6.Don't let the machine fall or friction with a hard object impact , otherwise may result in the machine surface grinding or other hardware damage.

7.The product shall not be used to undermine the rights of others. At your peril.

8.If found to be abnormal use, please contact your local dealer. Do not open this product without permission, resulting in peril.