Description
Burglar alarm with voice prompt function
Main Features:
Arm/disarm and alarming zone information has fixed voice IC
sound,very clear.
Support one relay outport, and one power + and – coming in port,
and 4 wired zones ports for connecting any wired detectors. can
remote control by telephone, so can control other appliances.
9 wireless and 4 wired defense zones(NC, 9V less than **0mA). Each
wireless zone can login 5 detectors,
The system can store 9 telephone numbers: positions **5 are for
standard use auto dial numbers, 6th position is for network alarm
call centers (not available in the UK), the 7th is for ‘away arm’
information upload, the 8th is for ‘stay arm’ information upload,
the 9th is for ‘disarm’ information upload. The panel can
automaticaly identify smoke or gas detectors.
The system can allow up to *0 remote controls to be logged in and
used.
Power protection, all information is stored in memory and therefore
there will be no loss of settings if a power interruption
occurs.
Alarm priority, when the telephone line is busy, the main host will
give priority to the alarm system.
Various arming modes, away arm, stay arm, mute arm and disarm.
Remote control function by telephone for arm, disarm, interphone,
listen-in (all after passcode has been entered and confirmed)
Line-cut alarm: when the telephone line is cut, the main host will
start the siren for 1 min. This function can be turned on or
off.
All parameters can be return to factory setting by *+password***9.
