Sell Brake pressure sensor for Benz

Description

 Brake pressure sensor for Benz
DESCRIPTIONS
J-W Sensor Control System Co.,ltd have been specialized in sensor manufacturing over *5 years. it is our pleasure to

recommend you the cost effective **1  Brake pressure  sensor.

Model **1 incorporates MEMS technology and custom Application Specific Integrated Circuit (ASIC) technology in the

design. It is specifically designed for tough automotive application.
Based on the piezo resistive principle two pressure sensor elements transform two system pressures into electrical

output signals proportionally to the pressure.
Model **1 is designed to perform in the underhood harsh environment such as temperature extremes, vibration, thermal

and mechanical shock, and corrosive chemical.

SENSOR SPECIFICATIONS
Electrical:
Supply Voltage 5.0±0.5 VDC
Supply Current *5 mA dc max per sensor
Output Type ratiometric
Output Voltage 1.0 to 4.0 V dc at 5V dc excitation
Electrical connector bayonet nut connector DIN *2 **5，6 pole with round contact
Operating Characteristics:
Range          0 to **4 psig/0 to 1.2 MPa/0 to *2 bar
Proof Pressure *6 bar (*0 bar pressure peak for t≤1 min)
Burst Pressure *0 bar for t≤*0 min
Total Accuracy (－*0c≤T≤*0c) 1 1.5ï¼…FS max
Environmental Effects:
Compensated Temperature Range (Celsius)       **0 to **0
Storage Temperature Range (Celsius)  **0 to ***0
Mechanical:
Pressure Port 2 pivots φ 9.4 mm for O-ring
Media Compatibility Compressed air, aqueous and saline, contaminated with technical grease and oil, solid and

gaseous combustion residue of oil (sulphurous hydrocarbon), parts of antifreezer and plasticizer
Protection Class IP *9 and IP *7 with plugged-in connector
Notes: