uses the advanced
craft and the rigorous design carries on the manufacture, and the
optimal overseas advanced method's binding clamp, has the
performance to be fine, the operation reliable, consumes energy,
the volume to be small lowly, wiring security, serviceability broad
and so on characteristics, is one ideal live pressure power source.
Is suitable in *0~*0Hz, the rated voltage does not surpass ***0V in
the alternating-current circuit, takes the engine bed and
mechanical device's control supply, the work illumination and the
signal light power source; May also take the small power power
source use. It conforms to GB***6, JB/T*******1, VDE*******3,
EN******1:***7, EN*********3:***0 and gets CE approval.
TDY1 transformer may divide into the shell type according to the
structure, according to installs the way to be possible to divide
into vertical. |
|
TDY1 series transformer
technology characteristic
Primary secondary circles
the system separately, when secondary when a winding, it shoulders
the transformer completely the rated capacity, when secondary like
has at the same time the control, the illumination and the
indicating lamp winding, presses various windings capacity
assignment to circle the system separately, to simplex winding, and
has intermediate tap's transformer its each intermediate tap
capacity, is smaller than transformer's rated capacity, only then
the overvoltage out-port may shoulder the rated capacity.
|
|
Before the order product must matters needing
attention
1, the purchase, estimates the
electric appliance aggregate capacity which first you use, selects
has the same capacity transformer, guarantees when the
instantaneous starting does not burn out the transformer.
2, this transformer strictly according to national related modular
design production, when you use the multi-windings (multi-control
voltage) when transformer, the capacity should increase the
transformer capacity correspondingly according to the
ratio-voltage, in order to avoid burns out the transformer.
3, before the installment, should examine the data plate to arrange
in order each data carefully whether to meet your requirement,
after confirming unmistakably, only then installs the use.
4, after circular telegram work, the transformer core and the coil
will give off heat (temperature rise not to surpass *0℃) belong
to the normal phenomenon, if the temperature rise surpasses *0℃,
even belches smoke, should the dump switch, inspect the electric
appliance capacity which immediately you use.
5, in the transportation, should avoid colliding as far as
possible, is sure not to be affected with damp, when use, please
note maintains, guarantees the transformer service life.
6, according to the user request custom make special transformer
product, the product size will change or the basis user request
consultation determination correspondingly.
|
