Description
�
?Summarize?
This product is CAN protocol fieldbus redundant
module; achieve the exchange between single bus and redundant dual
bus, which can connect CAN single port device to redundant bus
network. Real-time monitoring communication status, when working
port receiver detect the fault frame, char error, consecutive busy
and falling short of protocol error or bus consecutive busy for a
long time, will close this port, and then activate the redundant
port as working port. Ci-aa*1 series support the fieldbus based on
CAN2.0A/B: CAN?DeviceNet?CANOoen?SDS?NMEA***0?SAE
J***9?SAE J***4 and so on, rate set by DIP switch
(recommend) or rate adaptive optional, support CAN bus normally
used rates. Shenzhen Comark Technology Co., Ltd. is a professional
industrial networking equipment supplier; equipments done adopt the
latest technology with their own completed intellectual property
rights, launched the products with the features of
industry�s innovative.
The equipment can be set after
CAN device, change single cable bus to redundant bus, also can
change the redundant cable to non-redundant cable, meanwhile
featured Opto-isolation, reducing interference and other functions.
Products designed as industrial class, IP*0 protection grade, wave
pattern aluminum casing, *5mm DIN rail installation, DC (***6) V,
widely power input, featured relay alarm output, dual power
redundant, isolation protection and other advantages.
?Feature?
l���������Support
3 channels of independentCAN
bus, include CAN2.0A and
CAN2.0B, *2 kinds of pre-communication rate.
l���������DeviceNet?CANOoen
bus support DIP switch manually set all the standard rates or rate
adaptive
l���������6
pcs of LED status indicators with dual-color, power fault relay
output alarm.
l���������Electric
interface ***0V thunder-proof, 1.5A overcurrent protection, **0W
surge protection. Industrial design, EMC test
certificate.
l���������DC***6V
wide temperature redundancy dual power, reverse connection
protection.
l���������IP*0
protection grade, wave pattern aluminum enhance case; adopt
standard industrial *5mm Din Rail installation.
?Specifications?
Electrical
Interface:
���������3
pcs of 5pin port, conform the CiA organizational
recommendation.
���������Support
CAN BUS/DeviceNet/CANOpen bus standard.
���������Communication
Rates: DeviceNet/CANOpen all and normal used rate grade, up to
1M.
���������Have
the protection function of ***0V anti-lightning,1.5A over-current
and **0W surge-proof.
���������Terminal
Resistance: the equipment without terminal resistance, please use
the external one when necessary.
Power and
Protection:
���������Power:
dual power redundancy input, DC?***6?V, typical
DC*4V, power consumption less than 4W, has DC***0V voltage
isolation and reverse protection, industrial terminal
interface.
���������Relay
alarm output: optical fiber link failure and power error alarm
output, maximum capacity of contacts: DC*8V/1A, industrial terminal
interface.
Mechanical
Properties:
���������Dimensions:
**2mm�**5mm�*2mm
���������Casing:
IP*0 protection grade, wave pattern aluminum enhanced
casing.
���������Installation:
*5mmDIN rail installation.
���������Net
weight: **0g
?Order information?
|
P/N
|
Series
|
Description
|
Unite
|
|
Ci-aa*1
|
1*2 electrical
ports
|
CAN2.0A/B
standard, 1 �M� port (CAN3), 2 redundant bus A (CAN1), B (CAN2)
ports. DIP switch set rate.
|
pcs
|
|
Ci-dd*1
|
1*2 electrical
ports
|
DeviceNet
standard, 1 M port (CAN3), 2 redundant bus A (CAN1), B (CAN2)
ports. DIP switch set rate or rate adaption optional.
|
pcs
|
|
Ci-oo*1
|
1*2 electrical
ports
|
CANOpen standard,
1 M port (CAN3), 2 redundant bus A (CAN1), B (CAN2) ports. DIP
switch set rate or rate adaption optional.
|
pcs
|
�
