Description
THE WORKING CONDITION OF AN
ADHESIVE VARNISH
1. This adhesive varnish only
can be used with PVC Card and Hot pressure.
This adhesive varnish may be coated
on the core sheet directly or can be coated on the overlay
Film.
2. The
working condition with this adhesive varnish is the best condition
into between
**0
and **0 mesh by a semi- automatic
screen-printing machine.
The dry times is finished between *5
and *5 minutes on normal temperature.
3. The
working conditions of an adhesive varnish can be used with ******0
mashes by
automatic screen-printing machine
that should be fixed between 1.**0 and 1.**0/ hour of a conveyor
speed. The printing number can be worked of being coated into
2.**0~2.**0/ hour condition. The interior of conveyor will be
working between *5 and *5temperature.
4. The
working condition of roller coating is good with diluted methanol
into *0~*5%. And
then conveyor speed is controlled by
conveyor length on own yourself.
5. A
working condition of hot pressure is different with maker of making
hot pressure and the kind of hot pressure. The extent of this
adhesive tape is a wide of the limit. Approximately in
application as below following conditions.
(Notice; for the good condition with
your equipment.
The machine is properly set up In
accordance with your equipment conditions)
Hot
PressGeneral Condition
|
General
condition
|
1
Step(Heating)
|
2
Step(Cooling)
|
|
Temperature
(℃)
|
**0℃ ~ **0℃
|
Normal
Temperature
|
|
Pressure
(Kg)
|
*5 Kg ~ *0
Kg
|
*0 Kg ~ *0
Kg
|
|
Work time
(min)
|
*5 min ~ *0
min
|
*0 min ~ *5
min
|
