Crossed roller bearing RU124(G)/X UUCC0 with flange 80x165x22 mm

Description

THK crossed roller bearings RU series：
RU*2  RU*6  RU*5 RU**4G(X)  RU**8G(X)  RU**8G (X) RU**8G(X) RU**7G(X)  RU**5G(X) 
Model RU(Integrated Inner/Outer Ring Type)
Since the mounting holes are provided, this model does not require a presser flange or housing.  In addition, because it has an integrated inner/outer ring structure and is equipped with washers, its performance is minimally affected by the mounting  procedure, ensuring stable rotation accuracy and torque.  This model can be used for both inner-ring rotation and outer-ring  rotation.

We are a professional manufacturerof high precision bearings,which has combine research, production and marketing together.

Our leading productsare:
1.high precision crossed roller bearings :INA SX series ,XSU series ,XU series. THK RB series ,RE    series, RU series, RA series; IKO CRB series ,CRBC series, CRBH series;
2.high precision tapered crossed roller bearings: Timken’s  JXR series , XR series.
3.high precision YRT rotary table bearings, YRT series ,YRTS series ,YRTM series, ZKLDF series.
4.thrust cylindrical roller bearings.

C. Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers. 
2. Withstands force in any direction. Alternately crossed rollers *5º angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
 
D. Product Application
•Industrial Robotic arm,Reducer drive
•Percision Turntable,NC rotary table
•Rotation part of Machine tools
•Inspection instrument,Medical equipment
•Aero&Aviation equipment,Military radar etc
 
E. Installation & Cautions

1. Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2. Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed *0℃ . If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3. Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence,Do not tighten bolts randomly.