Description
Key Features
1.Combine the Pulse Reflection and Bridge Method ,Can test
Cable break ,mix, defective insulation or poor connecting.
2. Automatic measurement to find fault point
3. Manual measurement is also available.
4. Easy to use Menu driven operation
5.With the functions of Tram egger and Ohmmeter, which can
test insulation resistance and loop resistance.
6. *0 test results can be stored permanently even there is a
power off, which much convenient than print.
7. It adopts automatic gain and impendence technology, instead
of complex potentiometer regulation.
8. High resolution backlight LCD display, Can see it clearly
at different light
9. Power supply: Rechargeable Lithium ion battery
*0. Small size, simple operation
Technical Specifications
(1)Pulse Reflection Method:
1. Max. Measurement distance: 8km, the range can be set
according to length of the cable.
2. Measurement dead zone: 0m
3. Measurement accuracy: 0.5m (Range<2km), 8m
(Range>2km)
4. Pulse width: *0ns**0μs, can be set automatically
5. Impedance balance can be set automatically
6. Automatic and manual modes of gain adjustment
(2) Intelligent bridge measurement mode
1. Max Resistance of defective insulation: **0MΩ
2. Measurement accuracy: ±1% x length of the cable
3. Max. Measurement range: ***9m
4. Input by three segments, and the wire radius is
0.3mm*0.*9mm
(3). Capable of giving five hours of uninterrupted
working
1. Recharge time: 3 hours (full battery can be used continuous
for 5 hours )
2. Dimension: **0x**0x**0(mm)
3. Weight: 2.2kg
