Sell Countersunk Magnets

Description

Countersunk Screw Magnet
These magnets can be fixed in place using an M4 countersunk screw.

A pack of 2 - *5mm dia x 2mm thick x 4.2mm c/sink N*2 Neodymium Magnets. The NORTH pole is on the countersunk face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings -

Shape: Disc/Ring
Magnetic Face: *5mm dia
Thickness: 2mm
Grade: N*2
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB ( Neodymium )
Performance (Gauss): ***0
Vertical Pull (Kg): 1.*5
Slide Resistance (Kg): 0.*3
Max Temp (degrees C): *0
Fixing: M4 c/s Screw

These magnets will have approximately ***0 Gauss on each face. Each magnet can support a steel weight of up to 1.*5kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 0.*3kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets can be fixed in place using M4 c/s Screw and have a maximum operating temperature of *0 degrees