Painting Facility (2005)

Description

Due to the closure of the Spanish factory of a German plastic automotive manufacturer, our company has available for sale excellent B+M Synthetincs Painting Facility (year ***5 and almost new because it only worked less than 2 years) composed of: 

*2 Painting cabins with robot
-Mixing room with circulating for colour change
-Automatic washer system
-Water curtain and sludge removal system
-External warehouse for painting raw material

LAY-OUT . PRODUCTION PROCESS
-Frame loading 
-Ionisation
-Primer booth
-Colour booth (paint mixing room)
-Flash off zone
-Oven
-Evaporation of solvents (SAS)
-Cooling zone
-Frame unloading

PAINT LINE
Facility capacity:
***0 Frames. Surface of **0x**0 cm
-Rotating air chain in booth
-Maximum speed 2 mts x minute

BOOTHS
-Frontal water courtain
-Automatic painting with B+M six-axis robots.
-Robots are equipped with mixers
-Air speed: 0.5 m/min
-Plenums in the top of the booth
-EU5 Pressurization filters
-Water-based paints and solvents

MIXING ROOM
-Air conditioning
*7 Colours circulating
-Robots with mixers

OVENS - COOLING
-Minimum drying system of 1 hour
-Normal operating temperature *0° C
-Hot air filtration (EU4)
-Cooling system equipped with zinc coated blowing nozzles

EQUIPMENT
-Air discharge equipment. Capacity for *7,**0 m3/hr
-HEIMER Paint booth
-EUROWATHER Water softening system
-FISCHER Differential pressure meter
-VENTA Fan
-JUNG Lights
-GALTEC Humidity sensor
-JET Thermostat
-ALKO Air supply / extraction system
-CALDAN Conveyor system

Process version 1
. First coating with coating material 1 
. Flash off for 3.5 mins (v=2 m/min) 
. Second coating with coating material 1 
. Flash off for *0 mins (v=2 m/min) 
. Dry in oven for *0 mins at *0°C 

Process version 2 
. First coating with coating material 1 (primer) 
. Flash off for 3.5 mins (v=2 m/min) 
. Second coating with coating material 2 
. Flash off for *0 mins (v=2 m/min) 
. Dry in oven for *0 mins at *0°C