Description
Technical Parameters
3.1 YD**0 Intelligent Shaft Vibration Monitor
3.1.1 Signal Input: YD***0 eddy current sensor
3.1.2 Measurement range：0～**0um
Range can be
determined according to users’needs
3.1.3 Accuracy: Linearity deviation ≤ ± 1% (full scale)
3.1.4 Display: 3 digits digital tube display
3.1.5 Frequency
Response：0～***0Hz
3.1.6Current output: 4 ~ *0mA (can be adjusted according to
users' requirements to 0 ~ *0mA)
3.1.7 Communication Interface：RS**5
3.1.8 Alarm Contact Capacity：DC*8V 3A
3.1.9 Working Environment: Temperature: **0 ℃ ~ *0 ℃
Relative humidity: ≤ *5%3.1.*0 Power Supply: AC **0VAC ± *0% *0Hz
Power ≤ *0W
3.1.*1 Dimensions:
*0 × **0 × **0mm (H × W × L)
3.1.*2 Hole Size: *6 × **2 (H × W)
3.2 YD***0 Eddy Current Sensor
3.2.1 Probe
Diameter：φ8mm
3.2.2 Linear Range：2mm
3.2.3 Sensitivity：8V/mm
3.2.4 Linearity：2%
3.2.5 Frequency Response：0～5KHZ
3.2.6 Probe
Length：*5mm etc.
3.2.7 Mounting Thread：M*0×1mm
3.2.8 Working
Temperature：Probe:*0℃～**0℃
Proximiator
*0℃～*0℃
3.2.9 Power
Supply：**4VDC
3.2.*0 Dimensions：*3×*1×*9mm(L
× W × H)
