All the LED strips produced in our company, are assembled with
SMDs which of high-brightness, and together with flexible PCBs.
Thus of energy-saving, high-brightness, low-fading, also easy to
shear and install. Have a life expectancy up to *0,**0 hours.
As a backlighting device, it is widely used in interior cove,
window dressing, thin light boxes, lighting words, hotels, shopping
malls and other high grade places.
Applications:
1 Decorative lighting of a
room outline, furniture, garden, etc.
2 Hopping malls showcase, high-end goods display decoration.
3 Outdoor advertising and word decorative lighting.
4 The overall outline of the building decorative lighting.
5 Car decoration lighting.
Basic parameters:
1 Operating voltage: *2V
DC (optional *4V).
2 Specifications: ***0**2mm, ***0 lamp beads, one meter *0
lights, 5M/Roll, *4.4 W/Meter.
3 COLOR available: Red Yellow Blue Green White Warm-white
RGB(***0**2).
WATERPROOF GRADE: Casing, IP*5.
4 LED emitting angle: greater than **0 degrees.
5 Working temperature: *****0 degree.
6 Power supply: high-quality constant voltage power supply.
7 Using the flexible PCB as the base board.
8 Warranty: *4 months.
Product Features:
1 Every three LEDs form a
loop independently, so it can be cut off along the scissors-marked
position WITHOUT damage to other parts.
2 Assembled with flexible PCB, easy to bend and fix along the
contour surface.
3 There are 6 single color, 1 RGB and 4 waterproof grade for
customers to choose, and the Size & Quantity of LED beads could
also base on your requirements prior to mass production.
4 Assembled with regular-produced chip, of high brightness, low
light fading, pure color, long life, also the distance among LED
beads can be re-customized if you like.
5 It's great for lighting the corners of path & outline signs,
illuminating advertisements, transparent or non-transparent
objects.
Installation Instructions:
1 Here is a
double-sided 3M strong adhesive tape affixed on back of this
product, just tear off the protective film then attach it to the
desired location directly.
2 The maximum number of connections for a single path driver is 2,
if exceeded, please increase the number of drive circuit for power
supply.
3 Calculating the power for design and distribution scheme: Total
power comsuption = (Power of a single LED strip) X (Number of LED
strips desired). (it is recommended that a margin be left for power
matching, using *0% of the rated power)
Installation Notes:
1 Note that the output
DC voltage should be same as the rated voltage of the strip light,
do NOT use AC **0/**0V lighting the stip directly.
2 To ensure that the light bar installed with reliability, it is
best to fix it using the special 3M glue.
3 Please shear at the scissors-marked position, for outdoor
installation, it is necessary that take a waterproof method on the
connection position.
4 Do not excessively bend or pull the strip, the minimum angle
while bending, please do not less than *0 degrees.
5 This product, *4V can cut every six lights, *2V, three
lights.
6 To be installed in an anti-static environment, the proposed
operator to wear a static ring.
REMARKS:
1) Price comes higher as the
Waterproof Grade goes up.
2) Price may come lower or higher as the cumstomer's requirement
varies, of course the technics & material also vary.
Hytours Lee
goodledsupplier at gmail com
Shenzhen ART Lighting Co., Ltd.
Remember: we only produce LED STRIP.
Our purpose is: NOT ONLY LED STRIP, BUT LED STRIP OF ART.
