Description
Tempered glass is made by heating annealed glass uniformly.
The annealed glass is then cooled rapidly by blowing air uniformly
onto both surfaces at the same time. This is known as air
quenching. Rapid cooling increases the compression forces on the
surface and the tension forces inside the
glass.
Two main characteristics of tempered glass are its
toughness and safety.
1. Toughened glass, when broken, shatters into cube-shaped
particles, reducing serious deep cut injury. It therefore qualifies
as a safe glazing material.
2. Toughened glass offers greater strength against impact
compared to annealed glass, and thus, better resistance to the
force of wind. It is more effective if placed within a
well-designed, overall glazing system.
Machinery List
Five production Lines and one line uses TM Glass Finland with
patented heat balance sysmtem to ensure toughening performance (of
flatness of 2.*5mm).
Six sets of cutting machines including three sets of auto
cutting machine and three sets of water cutting machines.
Twenty sets of trimming machine that they are three sets for
special type, five sets for double line and the rest tevelve sets
for straight line.
Besides, there are seven sets of hole-puching machines.
Flat/Curve
Max Size:***0mm****0mm
Min Size: **0mm***0mm
Thickness: 2.*5mm to *9mm
