Description

Normal-pressure Continuous Sterilization , Cooling Equipment On normal-pressure continuous sterilization, cooling equipment, both steam and water heating are available for sterilization, with normal-temperature control and recording during continuous sterilization process, and the sterilization period is stepless adjustable. It is fully made of stainless steel, with nice appearance, clean and sanitary. And it is mainly used for secondary sterilization and cooling after capping of various bottles, cans and canned bagged beverages, cans. The roller type low temperature continuous sterilization machine is applicable for sterilization and cooling of various tinplate three-piece cans and tear-off tins. The mesh-type low temperature continuous sterilization machine is applicable for sterilization and cooling of various bagged tanks and beverages. U.H.T.Sterilization Equipment The equipment is composed of plate heat exchanger,balance tank, beverage pump, hot water system and electrical control system, for pasteurization and cooling of fresh milk, fruit juice beverage, winess. Plate Heat Exchanger The plate heat exchanger is composed of metal bellows plates, with holes on metal plates, and the heat transfer is carried out by the two flowing liquids in these holes. The plate installed between a frame plate and a pressure plate, tightened with lock bolt. Seal gasket is installed on the plate, to seal the channel and guide the liquids into the channel alternately. The number of plates is determined by the physical properties, pressure drop and temperature of the liquids. The bellows on plate promote fluidity of liquids, and support the pressure drop on plate. It is used for cooling and heating of cleaning liquids and water for pharmacy and other fluid foods, as well as pasteurization in some application.