DVSI Sand-Making Machine

Description

DVSI Sand-Making Machine:DVSI Sand-Making Machine is on the basis of our company’s many years’ research and development, manufacture of mining machinery as well as absorbing home and abroad advanced technology. It is the international advanced level of the new generation of energy-saving, efficient crusher. The performance in a variety of ores a chronology of equipment plays an irreplaceable role. The machine can be widely used in metal and non-metallic minerals, building materials, sand making, crushing and shaping of all kinds of metallurgical slag. Features and Benefits:1.High performance.2.Small influence by humidity (humidity can amount to 8%).3. End products with cubic shape, low flakiness rate, low noise (less than *5 db) and low dust.4. It is ideally suitable for granule reshaping and sand making DVSI Sand-Making Machine Daily Maintenance:1.There should be some person responsible for the machine. Operator should be trained. Understand technical performance of the equipment, familiar with the rules.2. To keep machine smooth running, draw out regulations of machine maintenance and safe operation. Meantime prepare necessary maintenance tools, lubrication material and other related equipments.3. Check firmware every shift, fasten immediately if any flexible.4. Stop the machine, open the checking door and check inside wear condition. Replace and remove immediately if any wear, wearable block should be changed whole set if any wear to keep impeller balance in running. Replace or repair immediately if any wear on impeller.5. To check impeller firmware every 7 days, wearable parts should be replaced and repaired if any wear.6. Check firmware and wearable parts in whirlpool chamber every half a month, if any abnormal condition, take immediate means to remove.7. Thin oil station use *5# bearing oil, oil amount is ******0L. Change oil in **0hours first time, then change oil every ***0. When change oil, open the oil pipe, clean and dry it, change damaged seal mat.8. Driving V belt tensioning is moderate, make sure v belt strain evenly, motors in two sides are imbalanced, and the electricity current is not more than *5A.9. Check hydraulic system frequently, maintain immediately if any abnormal phenomenon.*0. Open the bearing tube and clean in ***0 hour's normal running first time.