Sell 10/100M WDM Media Converter

*0/**0M WDM series Media Converter can convert Optical－Electric Ethernet signals between *0/**0M UTP interface (TX) and **0M optical fiber interface (FX).  It could extend traditional *0/**0M Fast Ethernet to the distance of *0km through single optical fiber link.  It possesses stable performance and good quality by adopting latest IC from USA and Taiwan. It must be used in couples，because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for users to observe network operation.

Main features  

â—†The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type. 

â—†Auto negotiation function allows UTP port to auto select *0M or **0M and Full Duplex or Half Duplex

â—†The UTP port supports MDI/MDI-X auto crossover.

â—†Supporting *6*0 bytes packet for management.

â—†Internal circuit of prevented thunder could greatly reduce damage of converters caused by thunderbolt induction.

â—†Indicator function of link fault (LFP): When optical fiber isat fault, the converter could stop all the link. (Optional) 

â—†Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.

Technical Specification:

◆Operating standards：IEEE**2.3u、*0/**0Base-TX and **0Base-FX；

â—†Data buffer: **8K.

â—†Connectors: UTP Connector: RJ**5, *0/**0Mbps;  Fiber Connector: SC, **0Mbps

â—†Cable:

UTP: Cat. 5 UTP cable (the max distance up to**0m)

Fiber ( Singlemode): 8.3/**5, 8.7/**5, 9/**5, *0/**5μm（the max distance up to *0km）

â—†Flow Control

  Full Duplex: IEEE**2.3x

  Half Duplex: back pressure