Description
1. Low noise, due to the helical suction and discharge, the
blower air flow in and out according to the direction of spiral
line, all these prevent the pulse noise and vibration. What's more,
by using the Impedance complex muffler, the noise of our blowers
are further reduced.
2. High volume and anti-heat efficiency, so it is
energy-saving. The blower rotor adopted the advanced Composite
curve, the meshing is more reasonable, and further increases the
volume efficiency.
3. Stable performance. The blower rotor, casing, wall panels,
shaft and other key components are all produced by the advanced
digital-control processing equipment thus make the
interchangeability of parts and components increased.
4. Low vibration. Although the rotor has been processed
precisely, and are all in balancing condition, we still adopted the
high precision balancing equipment and grinding machine to make it
more balance. Therefore, the blowers are almost no vibration.
5. With high precise and hardness Synchronization gear, we not
only extension blowers life, but also reduce its noise.
6. Our blower bearing is introduced from Japan. There are two
lubrication styles: Fat grease (below 0.6kgf/cm2), oil splash
grease (0.**0.9kgf/cm2), which makes the product quality more
liable.
7. The transported air is clean and without any oil-dust, as
the blower sealing structure is reasonable, oil can not enter the
chassis, thus the air is very clean.
8. Low price: As we have our own produce line so the price of
our blower is very competitive.
9. Advanced technology and accessory, we introduced advanced
blower manufacture technology from Japan and many of our
accessories are imported, such as NSK Bearing, imported Gear, and
Gates triangle belt and so on.
*0. Long life. The blower bearing what we used are all
double-row and Self-aligning bearing.
*1. The blower rotor is precision machined in its full
surface, and since it is balanced precisely, it is almost without
any vibration.
*2. Case Material: HT**0, Impeller Material: QT**0.
*3. Widely used in many fields, especially in gas
transportation, waste water treatment, aquaculture, pneumatic
transport, vacuum packing, oxygen generation, etc.
*4.Oil tank: after milling they are all polished by digital
grinding machine, in order to prevent the grear from broken because
of oil leakage.
*5. Bearing:Our bearing are doulbe-line bearing, can adjust
the concentricity, and they are all strong fighting force, low
vibration, moreover, and highly increase the life of the
blowers.
*6.Mercury column detecor: we test the air capacity and
pressure through it, and makes the result very precise, and avoid
the artificial error
Major specification of LZSR three lobes roots blower:
Model: LZSR*****0B
Air capacity: can reach more than **0m3/min can do according
to your demand
Outlet Diameter: *****0mm
Pressure: can reach **0kpa
Discharge Pressure:0.**1.0kgf/cm2
Motor Power: 0.*****5kw
Standard Accessories
Suction Silencer (With Air Filter)
Discharge silencer
Anchor Bolt
Reverse Valve
Flexible Joint
Safety Valve
Pressure Gauge
Common Base
Blower Pulley
Motor Pulley
V-belt Cover
V-belt
Lubricating oil
